RE: BRMS Console Issues

Jim,

Sounds like you have everything covered from a BRMS configuration standpoint. I do this successfully each weekend 6 times over, but those six systems of are on v6. When the STRBKUBRM *CTLSBS command is issued from my CL run stream BRMS submits a job named after the control group to Q1ACTLSBS job queue which is routed to your controlling subsystem. This is going to sound like Captain Obvious but you did review that job log? Seems like that log would at a minimum contain some evidence relative to why BRMS is unable to restrict the system. Otherwise just wait for IBM to finish the flight recorder analysis. I would be interested to hear your solution. I don't want to run into this @ v7....it would result in multiple untimely phone calls early Sunday morning :-)

***********************************
Bradford Lovelady

Operating Systems Engineer
Technology Infrastructure Services

Wells Fargo Bank l 200 Wildwood Pkwy l Birmingham, AL 35209
MAC W2691-010
Tel 205-938-1999 l Cell 205-826-2834

brad.lovelady@xxxxxxxxxxxxxx


Wells Fargo Confidential

This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message.  Thank you for your cooperation.


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Monday, October 08, 2012 11:36 AM
To: Midrange Systems Technical Discussion
Subject: Re: BRMS Console Issues

1) yes the applications are brought down and TCP is ended in the CL. It is not at a restricted state so things like the job scheduler will still work.
2) System policy allows batch backups

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 10/8/2012 10:51 AM, ankush agrawal wrote:

Out of curiosity,

1. are you calling the CL to end all the subsystems from outside the
control group? I System console session should be ended. In system
policy, Allow backups in batch should be *Yes


Thanks,
Ankush Agrawal
On Mon, Oct 8, 2012 at 10:14 AM, Paul Nelson<nelsonp@xxxxxxxxxxxxx> wrote:

Heehee

Paul Nelson
Cell 708-670-6978
Office 512-392-2577
nelsonp@xxxxxxxxxxxxx

-----Original Message-----
From:midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Monday, October 08, 2012 10:14 AM
To: Midrange Systems Technical Discussion
Subject: Re: BRMS Console Issues

That was done long ago, well, Rochester support anyway.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 10/8/2012 10:10 AM, Paul Nelson wrote:

> Sounds like it's time to call Miss Debbie. :-))
>
> Paul Nelson
> Cell 708-670-6978
> Office 512-392-2577
> nelsonp@xxxxxxxxxxxxx
>
> -----Original Message-----
> From:midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim
Oberholtzer > Sent: Monday, October 08, 2012 10:08 AM > To:
Midrange Systems Technical Discussion > Subject: Re: BRMS
Console Issues > > I just checked the system shutdown program
used pre-save.
>
> All the applications, WAS servers, Domino, etc are brought
down nicely > with time limits. Then TCP is ended, prior to the
control group > starting. So, all of what we came up with to be
in the way seems to be > dealt with in a proper way.
>
> Kinda narrows it down to a processing issue within BRMS.
>
> Jim Oberholtzer
> Chief Technical Architect
> Agile Technology Architects
>
>
> On 10/8/2012 9:58 AM,rob@xxxxxxxxx wrote:

>> > Keep in mind that BRMS Network is rather fond of TCP/IP.
>> >
>> >
>> > Rob Berendt
>> > -- IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept
>> > 1600 Mail to: 2505 Dekko Drive Garrett, IN 46738 Ship to: Dock 108
>> > 6928N 400E Kendallville, IN 46755http://www.dekko.com From: Jim
>> > Oberholtzer<midrangel@xxxxxxxxxxxxxxxxx> To: Midrange Systems
>> > Technical Discussion<midrange-l@xxxxxxxxxxxx>, Date: 10/08/2012

10:54

>> > AM Subject: Re: BRMS Console Issues Sent by:
>> > midrange-l-bounces@xxxxxxxxxxxx Rob, I had not considered that. I
>> > wonder if the TCP is getting in the way of the back up? I highly

doubt

>> > that it could affect it much since by that time everything using TCP
>> > is down, but still... You have to wonder. Jim Oberholtzer Chief
>> > Technical Architect Agile Technology Architects On 10/8/2012 9:50 AM,
>> > rob@xxxxxxxxx wrote:

>>>> >> > Ok, here's something that may differ between V7 and prior

releases.

>>>> >> > TCP/IP. ENDSBS *ALL doesn't kill TCP/IP like it used to.

> Possibility?

>>>> >> >
>>>> >> >
>>>> >> > Rob Berendt
>>>> >> > -- IBM Certified System Administrator - IBM i 6.1 Group Dekko

Dept

>>>> >> > 1600 Mail to: 2505 Dekko Drive Garrett, IN 46738 Ship to:

Dock
108

>>>> >> > 6928N 400E Kendallville, IN 46755http://www.dekko.com
>>>> >> > --

>> > --

> --

--

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.