Re: IBM Systems Director Navigator for i

[Jim Oberholtzer <midrangel@xxxxxxxxxxxxxxxxx>]

Rob sent screen shots privately and this is the exact problem I am 
experiencing as well, so it's not an individual system issue.

I'll call in a PMR and we shall see.  Watch this space for updates.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 9/20/2012 9:21 AM, rob@xxxxxxxxx wrote:
> Are you saying that when you select disk units you get a screen that says:
> "Password not correct for user profile .... For more information, visit
> the IBM i Information Center."
>
>
> You click OK and you get an empty list and no chance to enter in the SST
> user id and password (like you do in the full client)?
>
>
> Preposterous!  I'd have to see that to believe that!
>
>
> Rob Berendt
> -- IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 
> 1600 Mail to: 2505 Dekko Drive Garrett, IN 46738 Ship to: Dock 108 
> 6928N 400E Kendallville, IN 46755 http://www.dekko.com From: Jim 
> Oberholtzer <midrangel@xxxxxxxxxxxxxxxxx> To: Midrange Systems 
> Technical Discussion <midrange-l@xxxxxxxxxxxx>, Date: 09/20/2012 10:04 
> AM Subject: Re: IBM Systems Director Navigator for i Sent by: 
> midrange-l-bounces@xxxxxxxxxxxx Rob, My problem is with Director 
> Navigator (web based) not the Navigator client. Jim Oberholtzer Chief 
> Technical Architect Agile Technology Architects On 9/20/2012 8:58 AM, 
> rob@xxxxxxxxx wrote:
> > >  I've used iNav before to add disk drives and whatnot.  I am having
> really
> > >  weird issues today but iNav really hates it when I put my computer into
> > >  sleep mode at night.  Normally an exit and restart fixes it.  But today
> I
> > >  think it's hanging on to something.  For one thing it's starting too
> fast.
> > >     Another, I am getting "There was a severe problem retrieving Disk Unit
> > >  information from the System i5.  This is not a communication problem.
> > >  Please contact your service representative.  Error code: SAXEXC.
> > >  I'd try a reboot, but I'm kinda busy.
> > >
> > >
> > >  Rob Berendt
> > >  -- IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept
> > >  1600 Mail to: 2505 Dekko Drive Garrett, IN 46738 Ship to: Dock 108
> > >  6928N 400E Kendallville, IN 46755http://www.dekko.com  From: Jim
> > >  Oberholtzer<midrangel@xxxxxxxxxxxxxxxxx>  To: Midrange Systems
> > >  Technical Discussion<midrange-l@xxxxxxxxxxxx>, Date: 09/20/2012 09:44
> > >  AM Subject: IBM Systems Director Navigator for i Sent by:
> > >  midrange-l-bounces@xxxxxxxxxxxx  Has anyone noticed that when starting
> > >  "Configuration and Service" then drilling down into the hardware (in
> > >  this case Disk Pools) the SST credential is always wrong? I have both
> > >  the IBM i and the SST profiles the same with the same password (Tried
> > >  both upper case passwords and lower case passwords) All the groups and
> > >  cumulative up to date as of 9/4. Feels like a bug to me, but I
> > >  wondered if anyone else has experienced the same thing. Works great
> > >  with using System i Navigator, but then System i Navigator always
> > >  prompts me for a profile/password so it does not matter if the
> > >  passwords are synch'd or not.
> > >  -- Jim Oberholtzer Chief Technical Architect Agile Technology Architects
> > >  --