Re: System Planning Tool

Thanks Jim.


Adam Driver
IBM Certified Systems Administrator - System i
Consultant - Infrastructure Engineer
Exacta Corporation
(608) 661 6697 ext 2581
adriver@xxxxxxxxxxxx<mailto:adriver@xxxxxxxxxxxx>
Please consider your environmental responsibility before printing this e-mail.



date: Fri, 07 Sep 2012 17:20:55 -0500

from: Jim Oberholtzer <midrangel@xxxxxxxxxxxxxxxxx<mailto:midrangel@xxxxxxxxxxxxxxxxx>>

subject: Re: System Planning Tool



Using the system planning tool is dependent on your knowledge of the

hardware. In your case, understand the hardware at WEA Trust, and then

put it in to the tool. The tool itself is relatively easy once the

hardware configuration is understood.



So as far as the resources: hardware information center,

DeveloperWorks, and if you look back in the archives, between me, Pete,

and Larry (and a few others) we have discussed quite a bit of the

hardware and some of the best practice items.



Jim Oberholtzer

Chief Technical Architect

Agile Technology Architects



[Like us on Facebook!]<http://on.fb.me/t7A5KE>

- WEA Trust Confidentiality Notice -

This electronic mail message and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. Dissemination, forwarding, printing, or copying of this electronic mail without the consent of the sender is strictly prohibited. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error; please immediately notify the sender by return mail.