RE: Migrate twinax console to LAN console V5R2

Unfortunately that link is for:

Software version:​
5.4.5, 6.1, 6.1.1,
V5R4M0, V5R4M5, V6R1M0, V6R1M1

I am V5R2.

________________________________________
From: midrange-l-bounces@xxxxxxxxxxxx [midrange-l-bounces@xxxxxxxxxxxx] on behalf of Jim Oberholtzer [midrangel@xxxxxxxxxxxxxxxxx]
Sent: Monday, July 02, 2012 11:36 AM
To: Midrange Systems Technical Discussion
Subject: Re: Migrate twinax console to LAN console V5R2

That option was not added until V5R4 I think. You need to use the front
panel (65+21) to change the console. I think the link sent earlier has
the exact instructions.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 7/2/2012 11:28 AM, Lindstrom, Scott R. wrote:

Jack - this is opt 8 in V5R2:

8. Work with service tools user IDs

Which brings me here:

Work with Service Tools User IDs
System:
pe option, press Enter.
1=Create 2=Change password 3=Delete
4=Display 5=Enable 6=Disable
7=Change privileges 8=Change description

There is no option to set the console type. Is it somewhere else in V5R2?

Scott


-----Original Message-----
From:midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Sent: Monday, July 02, 2012 11:25 AM
To: Midrange Systems Technical Discussion
Subject: Re: Migrate twinax console to LAN console V5R2

start SST, take opiton 8 (Work with service tools user IDs and Devices),
can you do anything with option 3 that would allow you to change it to lan
console.



On Mon, Jul 2, 2012 at 12:17 PM, Lindstrom, Scott R.<
Scott.Lindstrom@xxxxxxxxxxxxxx> wrote:

Sorry - that link was valid before. It is a PDF document that gives the
steps to do this V5R4M5 and beyond.

Scott


-----Original Message-----
From:midrange-l-bounces@xxxxxxxxxxxx [mailto:
midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Lindstrom, Scott R.
Sent: Monday, July 02, 2012 11:16 AM
To:MIDRANGE-L@xxxxxxxxxxxx
Subject: Migrate twinax console to LAN console V5R2

I have a V5R2 system that I need to get over to LAN console so we can add
some LPAR's. I found this document:


http://www-01.ibm.com/support/docview.wss?uid=nas179a308457dd4c6c18625770e0057530f

But it covers V5R4M5 and beyond; it directs you into SST option 8 "user
IDs and*devices*" to set the console type to '3' Ops Console. In V5R2 the
'devices' part is not there.

Does anyone know how I change the console type from Twinax to Ops LAN
console in V5R2?

Scott Lindstrom

--

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.