Jack, thanks for reply!
 
apart from new parameters introduced in v7r1, SMTP attributes are the same
 
CHGSMTPA + F4
 
...(common part omitted)

OVRRJTCNNL     *NO          
ALWBARELF      *YES         
VFYID          *NO          
ALWAUTH        *NONE        
VFYMSFMSG      *YES         
VFYFROMUSR     *ALL         
FWDHUBSVR      relay.mydomain.local

wrkdire setup is same on v5r4
 
SYSTEMI can ping and send outbound mail with no problem at all.
it can recive the inbound mail also, but it refuses to accept mail for user@xxxxxxxxxxxx  .
remember, mydomain.com is our pubblic domain name.
 

________________________________
From: Jack Kingsley <iseriesflorida@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Sent: Thursday, March 1, 2012 6:51 PM
Subject: Re: smtp and v7r1

Have you checked your SMTP attributes to see what they look like compared
to the old machine.  Do you have the WRKDIRE setup. Can you ping your
gateway SMTP with any problems.

On Thu, Mar 1, 2012 at 7:56 AM, dino muzic <dimuzic@xxxxxxxxx> wrote:

hi,

recently upgraded from v5r4 to v7r1.  we are running smtp and pop server
with msf framework all on one machine.

iseries(SYSTEMI) is acting as internal smtp server.
smtp traffic from and to internet is relayed through  an intermediate
machine.


we use separate domain names
===========================================
MYDOMAIN.LOCAL    .... internal domain name
MYDOMAIN.COM        .... public domain name

iseries (SYSTEMI) system configuration follows:

dspneta
===========================================
SYSTEMI
APPN
SYSTEMI
SYSTEMI
BLANK
*ENDNODE
*NONE
*NONE
200
128
*LCLNETID  *ANY

SYSTEMI interface ip:
===========================================
1.1.1.4

tcp domain configuration:
===========================================
HOSTNAME      'AS400'
DMNNAME        'MYDOMAIN.LOCAL'
DMNSCHLIST    'mydomain.local'
HOSTSCHPTY    *LOCAL
INTNETADR      1.1.1.1
                              1.1.1.2

host table:
===========================================
1.1.1.4    SYSTEMI.MYDOMAIN.LOCAL
                AS400.MYDOMAIN.LOCAL
                MYDOMAIN.LOCAL
                MYDOMAIN.COM

dspdire user:
===========================================
JOHN    SYSTEMI
e-mail for user John Black
SYSTEMI
EMJOHN    ..(user account)
JOHN    SYSTEMI

SANDY    SYSTEMI
e-mail for user Sandy White
SYSTEMI
EMSANDY    ..(user account)
SANDY    SYSTEMI
...

smtp alias table:
===========================================
ID user SMTP  . . . . . :  jblack
Domain SMTP  . . . . . . :  MYDOMAIN.LOCAL

ID user SMTP  . . . . . :  swhite
Domain SMTP  . . . . . . :  MYDOMAIN.LOCAL
...

smtpa:
===========================================
AUTOSTART      *NO
RTYMIN
                10
                30
RTYDAY
                0
                0
RTYHOUR
                0
                0
RTYRMTSVR      *NO
AUTOADD        *NO
USRIDPFX      QSM
ADDRESS        QSMRMTAD
SYSNAME        TCPIP
TBLTYPE        *SYSTEM
USRIDDELIM    '?'
MAILROUTER
*NONE
CCSID          00819
TBLSMTPOUT
                *CCSID
TBLSMTPIN
                *CCSID
FIREWALL      *YES
JOURNAL        *NO
ALLMAILMSF    *YES
PCTRTGCHR      *YES
DIALSCD    *NO
ETRNSVR        *NO
ETRNCLT            *NO
MIME8BIT      *NO
NFYDLVRY              *NONE
SBSD          QSYSWRK
                      QSYS
RBLSVR        *NONE
ALWRLY        *ALL
POPWDW        65535
IFCDMN        *NONE
FTRACN        *NONE
OVRRJTCNNL    *NO
ALWBARELF      *YES
VFYID          *NO
ALWAUTH        *NONE
VFYMSFMSG      *YES
VFYFROMUSR    *ALL
FWDHUBSVR      relay.mydomain.local

Sending mail from:
internal to internal domain

===============================================================================================
jblack@mydomain.local to swhite@mydomain.local    ..this mail is local to
SYSTEMI
    *this works on v5r4 and v7r1

internal to any domain on internet

===============================================================================================
jblack@mydomain.local to someuser@xxxxxxxxx    ..this mail is relayed
through  FWDHUBSVR    ( relay.mydomain.local, which
    is rewriting jblack@mydomain.local to jblack@xxxxxxxxxxxx)
    *this works on v5r4 and v7r1

external world to internal domain

===============================================================================================
someuser@xxxxxxxxx to jblack@xxxxxxxxxxxx  ..this mail is relayed through
relay and delivered to SYSTEMI with recipient jblack@xxxxxxxxxxxx .
    *this works on v5r4 not on v7r1!
    *v7r1 replays with no delivery ( not able to deliver mail for user
jblack@xxxxxxxxxxxx)



seems as on v5r4 one could simply add reference to mydomain.com into
SYSTEMI host table and "override"  the domain portion of smtp alias table.
any ideas on how to "convince" the v7r1 to accept incoming smtp with
recipient domain portion  mydomain.com?

any help would be appreciated
thanks
dino muzic
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].