Re: speed diff ethernet half and full duplex -- MIDRANGE-L

× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.

...same local network. They are not, and that's where we ended up.
The internet pipe was determined to be "tiny...", so that even the 10M ethernet on one sys was more than the pipe allowed.
They are going to write to a local network external drive, and overnight to the other site.
Thanks for all the responses.
Jim

----- Original Message ----- From: "Kirk Goins" <kirkgoins@xxxxxxxxx>
To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Sent: Sunday, November 13, 2011 11:05 PM
Subject: Re: speed diff ethernet half and full duplex

On Sun, Nov 13, 2011 at 8:05 PM, Kirk Goins <kirkgoins@xxxxxxxxx> wrote:

I am curious you say "Systems have no tape compatibility, and opposite
sides of the country." Does mean they aren't on the same local network?
If so then the limiting factor is the data connection between the 2 sites,
not the local switches or port speed/duplex.

If they are local, I have had systems at times that were set to *AUTO for
speed and duplex 'say' they were running at 100 and FULL but that wasn't
what I was getting. Hard coding the line to 100 Full or the Switch seemed
to fix the issue.

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.