RE: QNTC and Domain Name

I finally got in to try this. No, it does not work. Just takes the '&' as the new domain name.


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Sent: Friday, October 28, 2011 4:17 AM
To: Midrange Systems Technical Discussion
Subject: Re: QNTC and Domain Name

Did it work.

On Thu, Oct 27, 2011 at 5:49 PM, Jim Oberholtzer <midrangel@xxxxxxxxxx>wrote:

Actually that is an IBM standard and works on most prompts that could
be varying length. Off hand I forget the exact syntax for the command
definition but it's defined there.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 10/27/2011 3:02 PM, Dave Snyder wrote:

What? Really? Would not have guessed that. I will give it a try.

Thanks

-----Original Message-----
From:midrange-l-bounces@xxxxxxxxxxxx [mailto:

midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley

Sent: Thursday, October 27, 2011 3:43 PM
To: Midrange Systems Technical Discussion
Subject: Re: QNTC and Domain Name

if you put an& in and hit enter does it expand the field length.

>

On Thu, Oct 27, 2011 at 2:20 PM, Dave Snyder<DSnyder@xxxxxxxx> wrote:

Dumb question: I need to change the domain name in NetServer but
our domain name will not fit (too long) in the box. Is there a
way around

this?

Dave

NOTICE - This e-mail message is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this message, you are hereby notified that any dissemination, distribution or copying of this message is strictly prohibited. If you have received this message in error, please notify the sender by e-mail or telephone and delete the original and all copies of this message immediately.

www.ephratanationalbank.com<http://www.ephratanationalbank.com>