Re: Forced portrait orientation

Not resolved.

Right after I hit send, it did dawn on me that as sharp as you guys are, you can't read minds. Should have sent the source.

I just looked at the printer on your link. MFRTYPMDL that I coded is not what is listed. Looks like it should be either *LEXOPTRAT or *HP4. Is anything else wrong (though that may be more than sufficient to cause weirdness)?


/* BOFP214 10/27/11 20:03:15 */

CRTDEVPRT DEVD(BOFP214) DEVCLS(*LAN) TYPE(3812) MODEL(1) +

LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) +

FONT(11 *NONE) FORMFEED(*CUT) SEPDRAWER(*FILE) +

PRTERRMSG(*INFO) MSGQ(*CTLD) ACTTMR(170) INACTTMR(*SEC15) +

LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1) +

TRANSFORM(*YES) MFRTYPMDL(*HP5SI) PPRSRC1(*MFRTYPMDL) +

PPRSRC2(*MFRTYPMDL) ENVELOPE(*NUMBER10) ASCII899(*NO) +

IMGCFG(*NONE) CHRID(*SYSVAL) RMTLOCNAME('10.50.172.214') +

SYSDRVPGM(*IBMSNMPDRV) +

TEXT('Patient Accounts Xerox printer 5135') +

PUBLISHINF(*DUPLEX *UNKNOWN *UNKNOWN *UNKNOWN *BLANK +

(*UNKNOWN))



John McKee

-----Original message-----
From: "Jim Franz" franz400@xxxxxxxxxxxx
Date: Thu, 27 Oct 2011 19:31:28 -0500
To: "Midrange Systems Technical Discussion" midrange-l@xxxxxxxxxxxx
Subject: Re: Forced portrait orientation

John,
Is this resolved?
What exactly is the configuration on i? (a rtvcfgsrc is helpful).
What is the default config on 5135? The IBM doc lists several options on
5135 not supported
https://www-304.ibm.com/support/docview.wss?uid=nas1cc6ee2005999a36d862569c100796da4

btw the *unknown is normal

Jim Franz

----- Original Message ----- From: "John McKee" <jmmckee@xxxxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Sent: Thursday, October 27, 2011 2:35 PM
Subject: Forced portrait orientation


> Is there a parameter for a printer devd that forces portrait > orientation?
> I have a Xerox 5135 which will not print landscape. Send it a 132 > column
> report, and the lines get truncated as report prints portrait.
>
> All the other printers get portrait forced by a WSCST. Nothing on this
> one. Possibly related is the publishing information shows *UNKOWN for
> data streams supported.
>
> Thanks,
>
> John McKee
> -- > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.