RE: RICOH WSCST object

The printer pulls from drawer 1, rather than the envelope drawer.

The change that I documented, in the original email was my attempt to
"redirect" from drawer 1 to envelope.

Michael

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Kirk Goins
Sent: Thursday, September 22, 2011 1:22 PM
To: Midrange Systems Technical Discussion
Subject: Re: RICOH WSCST object

I was/am fighting a Cannon C5045 with 1 tray loaded with a custom size
(11x14). While using the drawer select works, the copier refuses to
honor that request. It shows that the print jobs as requested the 2nd
drawe (
11x14 ) but stops the job and promptly says something like... The best
match for this job is Letter...

So I guess where I am going with this is... what is the printer doing or
not doing? Does it print the job from the wrong drawer?
Doesn't like the paper size? Might want to check the actual printer
config.. What if yuou tell it Envelope?


On Thu, Sep 22, 2011 at 6:20 AM, Michael Smith
<msmith@xxxxxxxxxxxxxx>wrote:

I am trying to make *RICOHSP6330N printer pull paper from the manual
feed tray. I have tried several combinations of changes the :DWRSLT
parms will no success.



This is the last attempt that was tried.



Does anyone have idea was to what I can try next.





Original

:DWRSLT

DRAWER=PAPER

DATA ='1B266C3248'X.

:DWRSLT

DRAWER=ENVELOPE

DATA ='1B266C3768314F'X. <<<<<<

:DWRSLT

DRAWER=DRAWER1

DATA ='1B266C3848'X.

:DWRSLT

DRAWER=DRAWER2

DATA ='1B266C3148'X.



:DWRSLT

DRAWER=PAPER

DATA ='1B266C3248'X.

:DWRSLT

DRAWER=ENVELOPE

DATA ='1B266C3768314F'X.

:DWRSLT

DRAWER=DRAWER1

DATA ='1B266C3768'X. <<<<<<

:DWRSLT

DRAWER=DRAWER2

DATA ='1B266C3148'X.





Michael Smith

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
Kirk
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.