Re: Axis 5400+ Printer Server issue

[Kirk Goins <kirkgoins@xxxxxxxxx>]

I got it to print 1 job but it would never leave SND like it never told the
iSeries the job had completed.
Well I will find out tackle this guy prob on Wednesday or Thursday. First
thing will be to update the
firmware on the printserver. It was suggested to get the latest firmware as
this basic symptom was a know issue.

On Mon, Jun 13, 2011 at 7:31 AM, Burns, Bryan <Bryan_Burns@xxxxxxxxxxxx>wrote:

> Did you get it working?
> I've got an AXIS server on a 6400 parallel port too, and it works for
> me.  What does your OUTQD look like?  Mine's:
>
> RMTSYS         *INTNETADR
> RMTPRTQ        'PR1'
> AUTOSTRWTR     1
> MSGQ           QSYSOPR
>                 *LIBL
> CNNTYPE        *IP
> DESTTYPE       *OTHER
>
> Hope this helps.
>
>
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Kirk Goins
> Sent: Monday, June 06, 2011 11:16 PM
> To: Midrange-L
> Subject: Axis 5400+ Printer Server issue
>
> Seems like my day for printer issues... I was trying today to get an
> Axis
> 5400+ printer server running. I have an IP on it and it is attached to a
> 6400 via a parallel connection. I can get it to print the first job
> using remoteoutq, but it stays in SND status and the printer says
> 'processing'.
> The job does print but the i5 never knows it finished.
>
> Any Ideas on this one?
>
> --
> Kirk
> --
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.