× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. June 2011

Re: Savin 9228

Exactly how this happened, I don't know. But, I had this wild idea to check the port number. For IPP, the default port is 631. But, the value in the DEVD was 0. I changed it to 9100 nad the driver to HPPJLDRV. The queued reports shot right out. No idea how long I looked at those parms.

John McKee

-----Original message-----
From: Vern Hamberg vhamberg@xxxxxxxxxxx
Date: Sun, 05 Jun 2011 08:26:13 -0500
To: Midrange Systems Technical Discussion midrange-l@xxxxxxxxxxxx
Subject: Re: Savin 9228

Probably IBM support can tell you - it's become time to contact them,
methinks.

Vern

On 6/4/2011 9:46 PM, jmmckee wrote:
Just ran through the list of drivers. Only the IPP driver added anything to the joblog. The others only have CPF3473 but there are no messages preceding it as to what the error is.

The IPP driver issued CPD6F88 and included that the device has returned IPP status message 406. Yhe explanation for status message 406 is "client error not found".

It was my understanding that the only PTF needed was for the device/model information. But, the model shows up.

Can anybody tell me if this is a PTF issue, or a printer issue?

John McKee

-----Original message-----
From: jmmckee jmmckee@xxxxxxxxxxxxxx
Date: Fri, 03 Jun 2011 22:51:29 -0500
To: "Midrange Systems Technical Discussion" midrange-l@xxxxxxxxxxxx
Subject: Re: Savin 9228

It>was< *HP5SI. Just changed it to *RICOHMP5000 per IBM page. No change. From what I saw, (may have missed something), PTF was only needed if printer model was not presented. Maybe I read that wrong.

John McKee

-----Original message-----
From: jmmckee jmmckee@xxxxxxxxxxxxxx
Date: Fri, 03 Jun 2011 22:09:48 -0500
To: "Midrange Systems Technical Discussion" midrange-l@xxxxxxxxxxxx
Subject: Re: Savin 9228

I>did< forget to change the manufacturer type/model. DUH! May do that yet tonight, remotely. No excuse for not checking more completely.

Thanks. I will also look at the PTF possibility.

John McKee

-----Original message-----
From: Vern Hamberg vhamberg@xxxxxxxxxxx
Date: Fri, 03 Jun 2011 15:50:04 -0500
To: Midrange Systems Technical Discussion midrange-l@xxxxxxxxxxxx
Subject: Re: Savin 9228

IBM has info on all manner of ASCII printers - I see there a page for
Savin's at *http://tinyurl.com/3l9vh8l* .

It does say you might need to put on a PTF - this document is from May
of this year, so it's really current. All the options seem possible with
this printer.

Maybe you don't have the PTF installed?

Seems you should not need to use a remote OUTQ - that'd be the LPR
option, which IS possible, according to the article.

HTH
Vern

On 6/3/2011 9:05 AM, jmmckee wrote:
Being out of loop is not fun. I was told that a Xerox printer was to be used in this area. Had a device description created, and it worked. Then, it didn't. Found out that the Xerox had been replaced with a Savin 9228. Same IP address.

I did a Google search, and saw that the 9228 is supported. What I don't know is whether it is supported at v5r4. I have tried *NETSTNDRV, *HPPJLDRV, *IBMSNMPDRV, *IBMPJLDRV, and *IBMIPPDRV.

When I try to start the writer, the writer ends immediately. Job log only says "An internal program error has occurred.".

Do I have to change anything else when changing the driver program? Is this device not supported at v5r4? I wish we we current on the os. But, in a little over a year, this system gets scrapped. Replaced with a network link to an unknown system, far away.

I have not tried remote output queue yet. I had hoped to get away from that.

I appreciate any thoughts.

John McKee

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.