Sounds to me like the one in the top left is lapping into the "unprintable" zone and either HPT or the printer IPDS driver is moving it into the center by default. Try moving it down right about an inch and see if it doesn't pop back up. Adjust from there.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jon S
Sent: Wednesday, June 01, 2011 8:58 AM
To: midrange-l@xxxxxxxxxxxx
Subject: PAGSEG problems


All,

I am trying to print a logo on an invoice and not having much luck. I am creating the logo by printing my jpeg to the Generic InfoPrint 300dpi AFP driver, that I got from the web as the Access driver throws and error, on a Windows 7 machine in the XP emulator going through Corel Photo Paint. I am changing my output type to Page Segment and my clip limits to Top .5, Left .5, Height .43 and Width 1.85 which is my image size.

It is suppused to be printing the image once in the top left corner and once about 3/4 down the page. No matter what I do, it only prints about 3/4 down the page and in the center of the sheet. I have another logo that I did years ago and when I change to PAGSEG to point to that one in the DDS, it prints correctly so I know it's the logo and not DDS.

Does anyone have any ideas? Any help would be appreciated.

Thanks, Jon


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.




This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].