Yep - a full house will beat 2 of a kind any day of the week

Alan Shore
Programmer/Analyst, Direct Response
P:(631) 200-5019
C:(631) 880-8640
"If you're going through Hell, keep going" - Winston Churchill

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Paul Nelson
Sent: Friday, April 15, 2011 9:56 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Decided to hang it up

Real programmers started with cards............ :-))

Paul Nelson
Office 512-392-2577
Cell 708-670-6978

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Wes Reinhold
Sent: Friday, April 15, 2011 7:59 AM
To: Midrange Systems Technical Discussion
Subject: RE: Decided to hang it up

Our guys get a kick when I ask them to 'Hang a tape' for me on our Iseries. I started on a IBM RAMAC computer in 1962 using vacuum tubes in the Air Force along with the old PCAM (punched card accounting
machine) machines.

I worked my through college working nights working on a IBM 1401, later 360/30.

As a veteran of hundreds of hours on card sorting machines I haven't heard the '9 edge first....' in many a year.

Still going strong writing RPG programs.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Friday, April 15, 2011 8:21 AM
To: Midrange Systems Technical Discussion
Subject: Re: Decided to hang it up

Not quite. My first job was wiring sorters at BlueCross BlueShield in Milwaukee. Still have the tools.

My first production COBOL program was on cards. After switching to the system side of things we ran TSO, VTAM, IMS, and several other utilities

all from cards. We did not have no stinking terminals at that time.
Six months later, yep they started showing up but we did not change over

the card decks to on line JCL for at least a year. I even built the NCP

in cards to start with.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

On 4/14/2011 10:21 PM, Thomas Garvey wrote:
I thought I was the only geezer on here with history that far back. I
started out on card sorters, interpreters, etc. on the midnight shift
an IBM System/360. We had to work our way UP to even get near that
We got so we could read an 80 column card from the punches (that would
reading hex for you young folks). When I left the 360/370 world we
managing huge machines that took up floors of space, were water
cooled, and
had people who did nothing but load and unload tapes, and others who
nothing but decollate and burst paper. Then jumped to the IBM System
Different cards and keypunches (on to diskettes) and then moved
up through System/38, AS/400, etc. A few weeks ago I installed a new
720 and today created a new guest partition for development.

I don't let myself think about retiring. Still writing new code in
PHP, HTML, JavaScript, Visual Basic, etc. My laptop has orders of
of capability compared to what used to be housed in those big iron
with libraries of tapes.

-----Original Message-----
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Midrange
Sent: Thursday, April 14, 2011 7:55 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Decided to hang it up

In the late 60s I worked for a power company and we sent out bills
designed 80 col card) and asked the customer to enter the meter
reading on
the card and make any changes needed to the address on the card. One
was received back in a mess and on the cad was written: I have bent,
stapled and mutilated this dam card, now change my F..... address

I wonder if that is still pasted on the computer room bulletin board

-----Original Message-----
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of James Lampert
Sent: Thursday, April 14, 2011 7:37 PM
To: Midrange Systems Technical Discussion
Subject: Re: Decided to hang it up

jmmckee wrote:
Here is a picture of one. This happens to be a JCL card:
And from that, you can presumably figure out what "face down,
first" means. Along with "Do not fold, bend, spindle, or mutilate."
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at

All products sold by Static Control Components, Inc. are intended for use in
the remanufacturing of laser printer and/or inkjet cartridges.
This message contains confidential information. If you are not the intended
recipient you should not disseminate, distribute or copy this e-mail.
Please notify Static Control Components immediately by e-mail if you have
received this e-mail by mistake and delete this e-mail from your system. Any
copyrighted material sent to you is for your own internal use only. No
portion of any copyrighted material may be reproduced in any form, or by any
means, without prior written permission from Static Control. Users are not
permitted to modify, distribute, publish, transmit or create derivative
works of any material found contained herein for any public or commercial
purpose. E-mail transmission cannot be guaranteed to be secure or error-free
as information could be intercepted, corrupted, lost, destroyed, arrive late
or incomplete, or contain viruses. Static Control Components therefore does
not accept liability for any errors or omissions in the contents of this
message which ar!
ise as a result of e-mail transmission.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].