156029 is a directory within claims. I want to move the entire directory
from .5 to .61. When I try
Mv '/tmp/dir1' '/tmp/dir2'
It works fine.
I've don't a wrklnk on both the .5 and .61 path and they show up fine. So I
know my path names are ok.
I was wondering if there is a restriction when trying to move a folder from
1 system to another if both systems are not located on the iseries...
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Mark S. Waterbury
Sent: Saturday, April 09, 2011 1:36 PM
To: Midrange Systems Technical Discussion
Subject: Re: using "mv" qsh command and qntc folders
Are you sure those are not directories? You could try this:
mv /qntc/188.8.131.52/claims/156029/* /qntc/184.108.40.206/data/ClaimArchive/156029/*
Or, try using the OS/400 MOV command from an OS/400 command line, rather
than "mv" from within Qshell .. you should at least get better error
messages. And, you can prompt the MOV command (by pressing F4).
On 4/9/2011 9:16 AM, tim.dclinc wrote: