My guess is that CA is ignoring white space or an empty field or something
like that?
I know this works ok for us when doing it on fields that are vertically
oriented as opposed to horizontally. Maybe open up a DCR or PMR with IBM
and have them put it in the next release? Can't get it if you don't ask
for it.
Thanks
Bryce Martin
Programmer/Analyst I
570-546-4777
"Helge Bichel" <hbi@xxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
03/21/2011 10:52 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc
Subject
RE: TN5250J didn't survive move to Windows 7
Hi Bryce.
My last post included 2 clips for showing the problem, but they CUT off in
the received mail. I try once more
with a text based copy/paste. Hope since comes without reformatting.
Me too, Cut/Copy/Paste all the time doing programming and moving/copying
lines or blocks of code.
In CA this works fine, but I have some situations where the paste doesn't
work.
Following example shows it.
Copy is selected by the rectangle covering multiple fields and pasted in
the
next line with similar fields. Can you see the problem in CA ? The paste
fills copied
fields left to right always using the next empty receiving field even if
it should be empty.
The +15,5 C F Y are filled into the wrong fields.
GESU1611143 RH 40 1 50 250,00 500,000 SEAL222222
+15,5 C F Y
Mvm F F Desc. Fresh Apples.................x in Pallets Temp min max
Unit Fract 1,0000 Customs
1 50 250,00 500,000 SEAL222222
+15,5 C F Y
Doing the same copy/paste in TN5250J gives:
GESU1611143 RH 40 1 50 250,00 500,000 SEAL222222
+15,5 C F Y
Mvm F F Desc. Fresh Apples.................x in Pallets Temp min max
Unit Fract 1,0000 Customs
1 50 250,00 500,000 SEAL222222
+15,5 C F Y
Perfect. User often uses this kind of copy/paste.
But TN5250J is missing the Cut.
Brgds
Helge
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Bryce Martin
Sent: Monday, March 21, 2011 1:22 PM
To: Midrange Systems Technical Discussion
Subject: RE: TN5250J didn't survive move to Windows 7
I do Cut/Copy/Paste all the time from CA... what exactly doesn't work with
it?
Thanks
Bryce Martin
Programmer/Analyst I
570-546-4777
"Helge Bichel" <hbi@xxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
03/18/2011 06:00 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc
Subject
RE: TN5250J didn't survive move to Windows 7
Thanks Pete and Alan for the update.
I'll try to work with the installer.jar tomorrow.
It's bad that the SourceForge 0.6.2 doesn't work. I don't know
who maintains what version and when, It's a bit confusing.
But, the TN5250j emulator seems to be the best in town especially when
users
demand a good working copy/paste function. tn5250j this is much better in
copy/paste
than CA and Mocha (awesome). I am just missing the CUT when doing
programming and can see that
this feature in on the list at SourceForge.
Using the current working 0.6.1 Beta 1 or 3 works nice and I have tried
having
this version for user download by using a .jnlp on the iseries accessed
via a webpage.
Problem is getting preconfigured sessions and keymap downloaded and
installed on users pc.
Can't get this to work (ok. I am not experienced in java).
Do you have any experience with this .jnlp download ?
But tn5250j is a great emulator an I hope it will continue being subject
to the enhancement
needed as described.
Best regards and a nice weekend
Helge
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Helgren
Sent: Friday, March 18, 2011 10:13 PM
To: Midrange Systems Technical Discussion
Subject: Re: TN5250J didn't survive move to Windows 7
The 0.6.2 was a fairly extensive rewrite/refactor and I haven't had a
chance to walk through the code and test it because I have been busy
with a couple of projects.
This link
http://www.petesworkshop.com/downloads/tn5250j-install-0.6.2_beta-1.jar
points to the installer version of the PRE "extensive rewrite" version
of tn5250j. The code was a version that I made some modifications to
and then compiled to run on Java 6. If you have Java installed you
should be able to just double-click or run the .jar and it should fire
up the installer.
The version that Alan referred to is just about the same without being
compiled as an installer. Either *should* work but, when it comes to
Java, there is always the *should*.
I'd try the installer first. If that doesn't work, then try the
tn5250j.jar file from the zip file that Alan referenced and replace the
one in the location that the installer installed (I have heard that
works).
Unfortunately, I haven't had a chance to install and test the latest
revision on Sourceforge which is why I have hung on the the ones on my
web site.
Pete Helgren
Value Added Software, Inc
www.asaap.com
www.opensource4i.com
On 3/18/2011 11:17 AM, Helge Bichel wrote:
I got version 0.6.2 from Sourceforge, but running this tn5250j.jar
only results in a frozen splash screen.
I have a 0.6.1 beta 3 working using java 6 update 24 (newest).
Does somebody know what's wrong with 0.6.2 or do I miss some preregs.
for running it.
Pete, pls tell me how to use the download you provided.
Brgds
Helge
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Helgren
Sent: Friday, March 11, 2011 5:52 PM
To: Midrange Systems Technical Discussion
Subject: Re: TN5250J didn't survive move to Windows 7
You could try the installer I have here:
http://www.petesworkshop.com/downloads/tn5250j-install-0.6.2_beta-1.jar
(use save as...)
I think it was the one I used to install in Win 7.
Sourceforge has a completely new version which I have not had a chance
to try yet but others have tried with good results.
Pete Helgren
Value Added Software, Inc
www.asaap.com
www.opensource4i.com
On 3/11/2011 9:33 AM, Nathan Andelin wrote:
From: Alan Campin
You will also find a link in the archive to the new version.
I found the link and downloaded the .zip file. Unfortunately it didn't
solve the
problem. It also included several other open-source projects that I
didn't need.
AFAIK, there were no installation instructions.
Thanks for the suggestion.
-Nathan
midrange.com
