Re: AS400 Profile Disabled

[jim t <jim_t_59@xxxxxxxxx>]

Since the error mentions QINTER then it can only be one of two things. Since it 
is unlikely that the user is doing it then it is the config of the connection. 
Go into OPS navigator/iSeries Navigator, right click on the connection and make 
sure the connection requires the user to enter the password.



 


----- Original Message ----
From: Dennis Lovelady <iseries@xxxxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Sent: Wed, August 11, 2010 1:15:22 PM
Subject: RE: AS400 Profile Disabled

I have advice rather than an official answer.  The tool's help/support may
bring something official to light.

The issue is probably not with the emulator session per se, but with what
used to be called "router functions" under the covers.  Usually, that entity
will log you into various functions as needed (such as data transfer or
opening a new display session).  The key is to cause this service/program to
end, and then restart it.

In the case of Client Access, when you start a session it asks for a
password, and can offer a chance to change the password then.  My first
recommendation would be to use that option.  If that's not applicable for
whatever reason, then perhaps (and this is dicey) the problems may be
avoided by exiting the tool after the password change.  (As far as I know,
IBM's Client Access solution no longer provides that capability, and a
reboot may be in order.  But in reality, it's probably a service that could
be restarted.)  The tool may have better guidelines for you; this is what
has worked for me.  Or I've been extremely lucky since the 80s (or whenever
PC Support/38 was introduced).

Dennis Lovelady
http://www.linkedin.com/in/dennislovelady
--
The bigger they are, the harder they hit. 


> How do I synchronise the tools password with the new AS400 Password
> which they would have changed while signed on.
>
> Is there any place in the 5250 Emulator which needs to be changed so
> that the password is in sync.
>
> Many Thanks
> Darell
>
> --- On Wed, 11/8/10, Dennis Lovelady <iseries@xxxxxxxxxxxx> wrote:
>
>
> From: Dennis Lovelady <iseries@xxxxxxxxxxxx>
> Subject: RE: AS400 Profile Disabled
> To: "'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
> Date: Wednesday, 11 August, 2010, 4:14 PM
>
>
> I have seen users get disabled because they were using a tool such as
> Client
> Access, and changed their password while signed on with that tool...
> then
> going on to perform other tool functions such as data file
> transfers.  The
> tool, under the covers, tries to log them in again with the password
> they
> used when they started...
>
> Dennis Lovelady
> http://www.linkedin.com/in/dennislovelady
> --
> Live and learn.
> (But not in that order.)
>
>
> > A user complains that a particular service profile gets disabled.When
> I
> > checked the AS400 Logs,it suggests the following:
> >
> > Message . . . . :   Subsystem QINTER disabled user profile BOTTOMLN
> on
> > device   QPADEV000G.
> >
> > Cause . . . . . :   User profile BOTTOMLN on device QPADEV000K or
> > network
> >  address XXX.XX.XX.XXX has been disabled because the maximum number
> > of
> >   sign-on attempts specified for the QMAXSIGN system value has been
> > reached.
> >
> > As per the logs ,the profile got disabled due to 3 unsuccessful
> > attempts.I have enabled the profile and it is working fine.
> >
> > I am curious if there can be any other  reason for this AS400 profile
> > getting disabled.
> > Is it related to Windows Login Id or 5250 Emulator or session timeout
> > etc disabling this profile for some reason?Pls advice
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.