Re: Stranded journal receiver: QRECOVERY/QSQJRN0001 from V6R1M0 install

Hi Evan,

I am following up on tracking the source program but it's the story of the
inventor has long fled the roost.

The creation was on the Saturday evening that we did the installation and
I'm trying to see if just deleting it wouldn't be the best route.

Maybe I'll place a call with IBM and see what they have to say.

Will check the other systems. This was on Eldora and it's the same on
Purgatory.

Cheers for now.

Paul

On 31 May 2010 16:54, Evan Harris <auctionitis@xxxxxxxxx> wrote:

Hi Paul

Sounds more like the recovery message/advice in the in house monitor
is incorrect. Checking the source for the program that traps the error
might give you a clue as to what error condition the program monitor
is trying to identify - there might even be some program comments that
shed light on whatever was being monitored for.

What's the creation date and time of the troublesome receiver and is
there a good reason for not just deleting ?

I don't really like the fact that the receivers for a system journal
are in library QRECOVERY - I think I'd want to do something about
that, even if it was only forcing a journal change to get the
receivers into a more correct library. Where do these receivers live
on the other systems ?

regards
Evan Harris

On Mon, May 31, 2010 at 4:02 PM, PaultinNZ <paultormey@xxxxxxxxx> wrote:

Hi Chuck,
The WRKJRNRCV QRECOVERY/QSQJRN0001 and display attributes shows:
Display Journal Receiver
Attributes


Receiver . . . . . . . : QSQJRN0001 Library . . . . . . . :
QRECOVERY


Journal . . . . . . . : *NONE Library . . . . . . .
:
Threshold (K) . . . . : 100000 Size (K) . . . . . . . :
28
Attach date . . . . . : 00/00/00 Attach time . . . . . :
00:00:00
Detach date . . . . . : 00/00/00 Detach time . . . . . :
00:00:00
Save date . . . . . . : 00/00/00 Save time . . . . . . :
00:00:00
Text . . . . . . . . . :
*BLANK


Auxiliary storage pool . . . . . . . . . . . . . . :
1
*Status . . . . . . . . . . . . . . . . . . . . . . : EMPTY
*

Number of entries . . . . . . . . . . . . . . . . . :
0
Minimized fixed length . . . . . . . . . . . . . . :
YES
Receiver maximums option . . . . . . . . . . . . . :
*NONE
Maximum entry specific data length . . . . . . . . :
0
Maximum null value indicators . . . . . . . . . . . :
0
First sequence number . . . . . . . . . . . . . . . :
0
Last sequence number . . . . . . . . . . . . . . . :
0
Fixed length data . . . . . . . . . . . . . . . . . :
Job name . . . . . . . . . . . . . . . . . . . . : NO
User name . . . . . . . . . . . . . . . . . . . . : NO
Program name . . . . . . . . . . . . . . . . . . : NO
Program library name . . . . . . . . . . . . . . : NO
System sequence number . . . . . . . . . . . . . : NO
Remote address . . . . . . . . . . . . . . . . . : NO
Thread identifier . . . . . . . . . . . . . . . . : NO
Logical unit of work identifier . . . . . . . . . : NO
Transaction identifier . . . . . . . . . . . . . : NO
Pending transactions . . . . . . . . . . . . . . . : NO
Minimize entry data . . . . . . . . . . . . . . . . : *NONE
Remote journal type . . . . . . . . . . . . . . . . : *NONE
Local journal . . . . . . . . . . . . . . . . . . . : *NONE
Library . . . . . . . . . . . . . . . . . . . . . :
ASP group . . . . . . . . . . . . . . . . . . . . :
System . . . . . . . . . . . . . . . . . . . . . :
Local journal receiver library . . . . . . . . . . : *NONE
Source journal . . . . . . . . . . . . . . . . . . : *NONE
Library . . . . . . . . . . . . . . . . . . . . . :
ASP group . . . . . . . . . . . . . . . . . . . . :
System . . . . . . . . . . . . . . . . . . . . . :
Source journal receiver library . . . . . . . . . . : *NONE
Redirected receiver library . . . . . . . . . . . . : *NONE

As far as I can see from the above, not much important has been set on

the

receiver.

"WRKJRNA JRN(QSYS2/QSQJRN)" shows the current Receiver as QSQRRN0248 in

Lib

QRECOVERY.

As mentioned an inhouse monitor had picked up the state of the journal

and

issued the following warning:
AS/400 system id: S6575D1C has a *stale *journal receiver:
QRECOVERY/QSQJRN0001
This could stop system journaling from working!
Please contact AS/400 support person with these details.

The QSQJRN0001 was created in the middle of systems installation.
Created by user . . . . . . . . . . : QLPINSTALL
I also see the following:
Journaling information:
Currently journaled . . . . . . . . : NO

So the question is, "Do I need to worry about this receive journal?"

Maybe I'll place a call with IBM?

Cheers
Paul

--
Regards
Evan Harris
http://www.auctionitis.co.nz
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.