RE: configure Okidata 421N on iseries -- MIDRANGE-L

"If LPR is set to Y, then the printer model should work with a Remote Output
Queue or a *LAN 3812 device description that uses the TSPLPRD utility, both
of which communicate with the printer and print server using the TCP/IP Line
Printer Requester (LPR) protocol."

Unless I reading this incorrectly, shouldn't I be able to create the device
as a *lan 3812?

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Scott Schollenberger
Sent: Wednesday, March 17, 2010 11:32 AM
To: Midrange Systems Technical Discussion
Subject: RE: configure Okidata 421N on iseries

The IBM Support Knowledge Base article

http://www-912.ibm.com/s_dir/slkbase.NSF/7c4c0f5a4d52e3c4862569b4005d198
a/4e596d0940ce1af1862569c100790da8?OpenDocument

shows that that printer can only be configured using LPR. It doesn't
support PJL, SNMP or IPP.
So your can't configure it as a device. It can only be set up as a
remote outq.

Scott

--------------------------------------------------------------------------
Scott Schollenberger
Vice President, Research & Development

P: 610-239-9988 x305
F: 610-239-9995
E: sschollenberger@xxxxxxxxxxxxxxxxxx
http://www.harriscomputer.com/
100-2011 Renaissance Blvd.
King of Prussia, PA
19406
http://www.harris-schoolsolutions.com

This message is intended exclusively for the individual or entity to which
it is addressed. This communication may contain information that is
proprietary, privileged or confidential or otherwise legally exempt from
disclosure. If you are not the named addressee, you are not authorized to
read, print, retain, copy or disseminate this message or any part of it. If
you have received this message in error, please notify the sender
immediately by e-mail and delete all copies of the message.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
tim.dclinc@xxxxxxxxx
Sent: Wednesday, March 17, 2010 11:22 AM
To: 'Midrange Systems Technical Discussion'
Subject: configure Okidata 421N on iseries

I tried to configure an Okidata ML421 on my iseries (v5r2), but when I
try
to print, the writer just ends abnormally.

Can someone tell me if my crtdevprt has any issues?

CRTDEVPRT DEVD(P6) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) +
PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) FONT(011 *NONE) +
FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) PRTERRMSG(*INQ) +
MSGQ(*CTLD) ACTTMR(170) INACTTMR(*SEC15) LINESPEED(19200) +
WORDLEN(8) PARITY(*NONE) STOPBITS(1) TRANSFORM(*YES) +
MFRTYPMDL(*OKI321IBM) PPRSRC1(*CONT132) PPRSRC2(*NONE) +
ENVELOPE(*NONE) ASCII899(*NO) IMGCFG(*NONE) CHRID(*SYSVAL) +
RMTLOCNAME('192.168.0.202') SYSDRVPGM(*HPPJLDRV) TEXT('OKI +
421') PUBLISHINF(*UNKNOWN *UNKNOWN *UNKNOWN *UNKNOWN +
*BLANK (*UNKNOWN))