×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
I was not able to load firmware on my JS12 blade. Turns out the
problem was a checksum error in the image I was downloading from the
IBM FTP site. I asked the support tech how I could have known more
about the error from the error logs on the BC-S. Here is his
response:
This is what you would see in the AMM event log:
57 INFO Blade_11 07/29/09 17:32:17 N 0x10000002 (SN#YL10W91xxx)Blade
power cycle.
58 ERR Blade_11 07/29/09 17:31:57 C 0x806F0212 (SN#YL10W91xxx)(System
Event) system hardware failure
59 ERR Blade_11 07/29/09 17:31:57 N 0x10000002 (SN#YL10W91xxx)SYS F/W:
Error, See reference code (53002486 BA278001 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000)
The key to these errors is the second code: BA278001
If you google that it will take you to:
http://publib.boulder.ibm.com/infocenter/powersys/v3r1m5/index.jsp?topic=/arebh/BA278001.htm
A good site to have, you can lookup SRC codes there directly.
This works for other Power blade/AIX errors that are reported to the
AMM. They all come in that format and thet second code is the one you
need to look for in almost all cases.
midrange.com
