Thank you for your response Charles but Sean seems to have understood my question better as he understood that the memory features I quoted include 4 chip and are installed as quads. I have the lowly power 5, no plus processor, pushing 500 CPW.

Chris Bipes
Director of Information Services
CrossCheck, Inc.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Charles Wilt
Sent: Monday, September 21, 2009 9:46 AM
To: Midrange Systems Technical Discussion
Subject: Re: 9406-520 Power 5 memory locations


The system builder redbook I have shows that POWER5 520 requires 4 slots filled.

POWER5+ 520 requires 2 slots filled. So I'm guess you have a POWER5+
if you only had two DIMMS.

The redbook goes on to say...
Memory features for the Model 520 with #8325, #8327 and #8330 processors
 #4400 - 1 GB DDR2 Main Storage (2 x 512 MB DIMMs: 533 MHz sdram CCIN 313A)
 #4474 - 2 GB DDR2 Main Storage (2 x 1 GB DIMMS: 533 MHz sdram CCIN 313B)
 #4475 - 4 GB DDR2 Main Storage (2 x 2 GB DIMMs: 533 MHz sdram CCIN 313D)
 #4477 - 8 GB DDR2 Main Storage (2 x 4 GB DIMMs: 533 MHz sdram CCIN 313E)
Requires a minimum of one pair of DIMMs on all processors.
DIMMs must be installed in sets of two (pairs).
For 9405 and 9406 processors, the first DIMM pair goes into DIMM slots
J0A & J2A. The second pair of DIMMs goes into
slots J0C & J2C, the third pair goes into DIMM slots J0B & J2B and the
fourth pair goes into DIMM slots J0D & J2D.

So it appear to me that whomever told you 1+8 would work was mistaken.


On Mon, Sep 21, 2009 at 12:05 PM, Chris Bipes
<chris.bipes@xxxxxxxxxxxxxxx> wrote:
Good morning.  Last Thursday I had a failed attempt at having a memory
upgrade performed.  I contracted out the install as the server is 2000
miles from home.  The installer did not put the memory into the correct
locations so the machine did not want to boot.  Our current
configuration has two  #4444 1 GB features and I am removing one of them
and installing a #4449 8 GB feature.  Now everyone tell me that the
system can be configured this way.  I have been searching IBM trying to
find out the exact pattern the memory need to be installed in with no
luck.  Does anyone know which of the 8 slots the memory has to be
installed in?

The final result will be 9GB with one #4444 and one #4449 memory

Chris Bipes
Director of Information Services
CrossCheck, Inc.

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2020 by and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].