Re: Electrical power requirements

OK, are you trying to size for your power circuits or a UPS? VA is volts
* amps. Generally you can add VA to get total VA, but you will have to be
aware of how many VA are needed at 220v and how many VA are needed at 100v
to get your circuits setup correctly.

Steve
- -
Steven Morrison
Fidelity Express





rob@xxxxxxxxx
Sent by: midrange-l-bounces@xxxxxxxxxxxx
03/11/2009 02:48 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
cc

Subject
Re: Electrical power requirements






That's kind of my point.

0595
Electrical
kVA (maximum) 0.358
Rated voltage and frequency 100-127/200-240 V ac at 50-60 plus or minus
0.5 Hz
Thermal output (maximum) 1161 Btu/hr
Power requirements (maximum) 340 W
Power factor 0.95
Inrush current 60 A
Leakage current (maximum) 3.5 mA
Phase 1
http://preview.tinyurl.com/bejpkp
http://publib.boulder.ibm.com/infocenter/systems/scope/hw/topic/iphad_p5/f5095.htm?resultof=%22%70%6f%77%65%72%22%20%22%72%65%71%75%69%72%65%6d%65%6e%74%73%22%20%22%30%35%39%35%22%20&searchQuery=%70%6f%77%65%72%20%72%65%71%75%69%72%65%6d%65%6e%74%73%20%30%35%39%35&searchRank=%33&pageDepth=%30


5886
kVA4 0.358
Rated Voltage/Frequency 100 - 240 V ac at 50 - 60 Hz
Thermal Output4 2382 Btu/hr
Power requirements (maximum) 700 W
Power factor 0.95
Inrush current 55 A per power cord
Leakage current (maximum) 3.10 mA
Phase 1
http://preview.tinyurl.com/5886power
http://publib.boulder.ibm.com/infocenter/systems/scope/hw/topic/iphad/iphadf5886sd1.htm?resultof=%22%70%6f%77%65%72%22%20%22%72%65%71%75%69%72%65%6d%65%6e%74%73%22%20%22%35%38%38%36%22%20&searchQuery=%70%6f%77%65%72%20%72%65%71%75%69%72%65%6d%65%6e%74%73%20%35%38%38%36&searchRank=%30&pageDepth=%30



Rob Berendt