RE: Another ? on Installing 270 memory

Hi Mark

If by "manually power on" you mean press the white button and do an
automatic IPL then they should apply if the systems ends normally.

However, if you do a manual IPL so you can check the hardware changes as the
system is coming up, then you will need to take some extra action. During a
manual IPL the system will present you with a PTF options screen showing the
installed licensed products. I don't know exactly what has to be done - I
don't ever remember actually using it to do anything with PTF's- but
hopefully it's reasonably obvious. These days, I've always found it just as
easy to IPL again.

Hope this helps

Regards
Evan Harris


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Mark Allen
Sent: Friday, 30 January 2009 4:23 a.m.
To: Midrange Systems Technical Discussion
Subject: Another ? on Installing 270 memory

If I have PTF's that are not yet applied (haven't done an unattended power
off/on yet to install) will they also apply afte I shut the system down
manually, install the memory and then manually power on?

Could make a big difference in my time window....