RE: Default Password for 4247-003 with IPDS?

I do not think there is a default password. I purchased a used Kyocera
printer that had an admin password set in the web interface. I had to
remove the interface card, change a jumper, reinstall the card, boot the
printer, just to restore to factory defaults. I then had to remove the
jumper so the printer would not reset to factory defaults every time it
was power up. Hard to due when you are 200 miles apart. Google
returned this:
IBM 4247 (with internal Ethernet print server), No PJL Support ..... The
default user ID is admin (in lowercase) and the default password is
22222 . ...




Chris Bipes
Director of Information Services
CrossCheck, Inc.


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Kirk Goins
Sent: Thursday, January 22, 2009 7:54 AM
To: Midrange Systems Technical Discussion
Subject: Re: Default Password for 4247-003 with IPDS?

Pat Barber wrote:

Sorry.. I did not catch that part about telnet/browser.
I have never attempted that with these printers.


Kirk Goins wrote:

Thanks for the info, but I'm 200 miles from the printer and want to
review some settings via the browser interface...

No Problem, neither had I but I gave it a try and...