Re: Run a .dtf from CLP

If you want to send remote commands from a batch job, try RUNRMTCMD.

However, you'll have to either know ahead of time, or run a program to
determine the name/ip address of the PC to send the command to.

Also, you need to turn on the "iSeries Access Remote Command" windows
service on the PC.

HTH,
Charles


On Wed, Oct 15, 2008 at 10:29 AM, Charles Wilt <charles.wilt@xxxxxxxxx> wrote:

The STRPCCMD sends a specially formatted screen to the emulator to
tell it to run a particular command.

So why would you think this would work in batch? Obviously it can't
given its dependence on a 5250 session.

Charles

On Wed, Oct 15, 2008 at 9:55 AM, Don Cavaiani <dcavaiani@xxxxxxxxxxxxx> wrote:

Got it to run interactively with these commands:

STRPCO
MONMSG MSGID(IWS4010)
STRPCCMD PCCMD('rtopcb.exe c:\qkeep3.dtf')

But, cannot submit it to batch as then get this error msg.

Command STRPCO not allowed in this setting.
Error found on STRPCO command.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Evan Harris
Sent: Wednesday, October 15, 2008 6:04 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Run a .dtf from CLP

Hi Don

When I used to run these in batch files I used to use the RTOPCB command
(not sure if that dates me or not...) Don't know if that's still current
or there is a new command.

To be honest, I wouldn't have expected that batch file to work at all.
Double clicking on a file with a file association might run the
associated programs but I didn't think that extended to running them in
batch. But it wouldn't be the first time that windows has surprised me.

Is the .dtf file really in the root ?

Regards
Evan Harris


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Don Cavaiani
Sent: Wednesday, 15 October 2008 11:37 p.m.
To: Midrange Systems Technical Discussion
Subject: RE: Run a .dtf from CLP

cwblogon 192.168.0.9 /u DCA /p xxxx
c:\qkeep3.dtf

Above is the content of the .bat file. This runs fine when I run it
straight from the PC side.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Evan Harris
Sent: Tuesday, October 14, 2008 7:39 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Run a .dtf from CLP

Hi Don

Pipe the batch file output to a log file so you can see what the batch
file is doing. For example:
RUNRMTCMD CMD('START C:\QKEEP3.BAT > C:\QKEEP3.LOG')
RMTLOCNAME('192.168.0.173' *IP) RMTUSER(DCAVAIANI) RMTPWD()

Regards
Evan Harris

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Don Cavaiani
Sent: Wednesday, 15 October 2008 1:09 p.m.
To: Midrange Systems Technical Discussion
Subject: RE: Run a .dtf from CLP

I have CWBRXD.EXE running on the PC, and the job lob shows the below
message, yet there is no update to he file which the .dtf (in the .BAT
file) should be creating? NO error messages - job appears to end
normally?

3200 - RUNRMTCMD CMD('START C:\QKEEP3.BAT') RMTLOCNAME('192.168.0.173'
*IP) RMTUSER(DCAVAIANI) RMTPWD()

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Charles Wilt
Sent: Tuesday, October 14, 2008 11:38 AM
To: Midrange Systems Technical Discussion
Subject: Re: Run a .dtf from CLP

As others have mentioned, you have to have the "iSeries Access for
Windows Remote Command" windows service running. Actually, any REXC
client server will do.

Also, given that you're trying to perform a file transfer with, note
that you'll have to place the transfer request in a .BAT file so that
you can use CWBLOGON command to log onto the iSeries before performing
the transfer.

HTH,
Charles

On Tue, Oct 14, 2008 at 11:14 AM, Don Cavaiani <dcavaiani@xxxxxxxxxxxxx>
wrote:

Cannot get past this error message:

" A remote host refused an attempted connect operation. " I tried all

the different options. Does a certain job need to be running (and kept
active) on the PC?

Also, do I need the CMD string to include C:\program

files\ibm\client access\cwbtf.exe ??

Don F. Cavaiani
IT Manager
Amerequip Corp.
920-894-7063

"It's amazing what you can accomplish if you don't care who gets the
credit." Harry S. Truman

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.