Re: Model 320 questions

["Peter Dow (ML)" <maillist@xxxxxxxxxxxxxxx>]

Thanks Rob -- that wasn't quite the manual, but it did have a reference
to it:

"For details on the iSeries
Models 250, 270, 820, 830, 840, SB2 and SB3, as well as the AS/400e
Models 170, 720, 730,
and 740, with corresponding feature and software information (through
OS/400 V5R2), refer
to IBM eServer iSeries and AS/400e System Builder: IBM OS/400 Version 4
Release 3 -
Version 5 Release 2, REDP-0542."

According to that, processor feature 24AC is within processor feature
2436, and it's a P30 with an interactive feature #1525, which appears to
mean the processor CPW is 560.  I don't see anything obvious about power
requirements, although I see various power supplies mentioned from 575-900W.

It's currently under software support, so I've asked them to get the
latest possible OS.  They haven't bothered because they've been busy
migrating to some other platform.

rob@xxxxxxxxx wrote:
> Well, as you see by the chart below it can run up to V5R4 and probably 
> V5R4M5 (which buys you nothing but easier to do an unload/reload to newer 
> hardware).  However, any upgrades probably require new keys.  You might 
> want to find out if it's under maintenance and have them order keys (and 
> media) for whatever release you desire.
>
> Get a copy of DSPSFWRSC and WRKLICINF (both to print).  If it doesn't have 
> 5722WDS and no possibility for keys for it, do you really want the 
> machine?
>
> This might have electricity, etc
> http://www.redbooks.ibm.com/redbooks/pdfs/sg242155.pdf
>
> Rob Berendt
>