I have updated two HMCs now to Service pack 1, and everything seems to have
gone very smooth and is working fine. Always good when that happens.
Still can't output the HMC sysplans into the SPT tool, which is a huge
failure on IBMs part.
Pete
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
ChadB@xxxxxxxxxxxxxxxxxxxx
Sent: Wednesday, September 19, 2007 2:50 PM
To: Midrange Systems Technical Discussion
Subject: RE: SP1 of HMC V7R310
Customers with existing HMC machine type 7310 with V6 R1.2 or higher may
upgrade to HMC V7
R3.1.0 by ordering the MES (Miscellaneous Equipment Specification) 0962
through their IBM Sales Representative or Business Partner. The HMC code V7
R3.1.0 may also be downloaded, but MES 0962 must still be ordered to
complete the conversion from V6 to V7. The MES updates the HMC machine
records to ensure continued product support. Machine records are not
automatically updated when
the code is downloaded so this requirement of ordering MES 0962 is
displayed on the download
web site for the MES. The MCRSA (Machine Control Program Remote Support
Agreement) is common
for HMC V4, V5, V6, and V7.
Anyone ever read that above? I've never heard this, but found it when
researching the SP1 for 7.3.1...
ChadB@wheeling-ni
sshin.com
Sent by: To
midrange-l-bounce Midrange Systems Technical
s@xxxxxxxxxxxx Discussion
<midrange-l@xxxxxxxxxxxx>
cc
09/19/2007 12:42
PM Subject
RE: SP1 of HMC V7R310
Please respond to
Midrange Systems
Technical
Discussion
<midrange-l@midra
nge.com>
Sounds good - mine logged:
E3550046
An uncaught exception has been caught by the thread group. An error log is
created to determine which code failed to handle the exception.
User Response
The secondary data block with ID "81" should be analyzed to determine the
code that is in error
"Pete Massiello"
<pmassiello-ml@it
echsol.com> To
Sent by: "'Midrange Systems Technical
midrange-l-bounce Discussion'"
s@xxxxxxxxxxxx <midrange-l@xxxxxxxxxxxx>
cc
09/19/2007 12:32 Subject
PM RE: SP1 of HMC V7R310
Please respond to
Midrange Systems
Technical
Discussion
<midrange-l@midra
nge.com>
Everyone that I have done has called home with an E355xxxx right after the
upgrade. AS well as right after the one corrective service (MH01015) we
have been putting on all V7.3 upgrades.
Pete
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
ChadB@xxxxxxxxxxxxxxxxxxxx
Sent: Wednesday, September 19, 2007 12:25 PM
To: Midrange Systems Technical Discussion
Subject: RE: SP1 of HMC V7R310
Mine looks like it called home just after the upgrade.
"Pete Massiello"
<pmassiello-ml@it
echsol.com> To
Sent by: "'Midrange Systems Technical
midrange-l-bounce Discussion'"
s@xxxxxxxxxxxx <midrange-l@xxxxxxxxxxxx>
cc
09/19/2007 11:48 Subject
AM RE: SP1 of HMC V7R310
Please respond to
Midrange Systems
Technical
Discussion
<midrange-l@midra
nge.com>
Rob,
I haven't yet. I am thinking of doing it next week on one that
I am upgrading from 6.2 to 7.3
I see there are a few issues fixed in SP1 which I was getting
after upgrading to 7.3 (some of the call home messages).
Let me know how you make out.
Pete
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, September 19, 2007 11:44 AM
To: Midrange Systems Technical Discussion
Subject: RE: SP1 of HMC V7R310
Load SP1 yet?
Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
"Pete Massiello" <pmassiello-ml@xxxxxxxxxxxx> Sent by:
midrange-l-bounces@xxxxxxxxxxxx
09/19/2007 11:33 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx> cc
Fax to
Subject
RE: SP1 of HMC V7R310
Chad,
I have loaded it on about 15 HMCs, and I have not had a
problem with this at all.
Pete
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
ChadB@xxxxxxxxxxxxxxxxxxxx
Sent: Wednesday, September 19, 2007 11:20 AM
To: Midrange Systems Technical Discussion
Subject: Re: SP1 of HMC V7R310
Rob - are you still liking 7.3.1? I'm about to walk in the system room and
load it right now! ;)
rob@xxxxxxxxx
Sent by:
midrange-l-bounce To
s@xxxxxxxxxxxx midrange-l@xxxxxxxxxxxx
cc
09/19/2007 10:25 Subject
AM SP1 of HMC V7R310
Please respond to
Midrange Systems
Technical
Discussion
<midrange-l@midra
nge.com>
Anyone put on SP1 for HMC V7R310 yet?
https://www14.software.ibm.com/webapp/set2/sas/f/hmc/power6/install/v7.Readm
e.html#MH01042
Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
