RE: WSCST type function on IPDS printer type -- MIDRANGE-L

It might work with twinax, as the system could tell there was only one device....

Then again, I vaguely recall that with a twinax attached *IPDS printer (6400) I couldn't have two
*DEVDs.

But I'm pretty sure it doesn't work with a network attached printer.

Charles

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Wilt, Charles
Sent: Monday, July 23, 2007 10:40 AM
To: Midrange Systems Technical Discussion
Subject: RE: WSCST type function on IPDS printer type

Steven,

AFAIK, the system would manage the forms if there was only one *DEVD.

With two going to the same printer, you'd run into issues
since the system sees them as two separate devices.

Charles

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
smorrison@xxxxxxxxxxxxxxxxxxx
Sent: Monday, July 23, 2007 10:28 AM
To: Midrange Systems Technical Discussion
Subject: Re: WSCST type function on IPDS printer type

The system will manage the form changes if you let it. Your

users must

wait for the forms change messages, then change to the

special form,

then answer the message with a 'G' to tell the system that

the special

form is loaded. If they answer the forms change message

with an 'I' -

Ignore, they just told the system that they did not change forms.
They'll also have to answer the forms change messages to

switch back

to normal forms correctly.

The system will not write to the printer description A if printer
description B is printing. You should test this with the

special forms

handling for yourself. We don't change forms often, and our

printer is

lightly used, except in the morning.

Steven Morrison
Fidelity Express

Steve Rushing <sgr_mags@xxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
07/20/2007 07:27 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>

To
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx> cc

Subject
Re: WSCST type function on IPDS printer type

Steven, my concern was forms changes. How does the plain

paper device

know

that the printer is full of invoices for IPDS printing and

vice-versa?

We only print invoices weekly, and the normal paper is

replaced with

invoice paper. If somebody in another department sends a

print job to

the printer before the invoice job prints, wouldn't the

printer start

printing the wrong thing on the invoice paper?

Thanks,

-Steve

For now we are using two different device descriptions to get it
all done, but they have to be careful to hold writers etc. when
setting up for special print jobs and forms. I would

prefer to have

on device description.

Any suggestions appreciated.

We have an IPDS printer (IBM 6400) with 2 device

descriptions. Both are

active (along with writers) at the same time with no

problems. I've also

used laser printers (IBM, HP & Lexmark) with IPDS cards

with multiple

device descriptions. Both device descriptions can be active

at the same

time without problems. Just send your output to the correct outq.

Steven Morrison
Fidelity Express
903-885-1283 ext. 479
--
This is the Midrange Systems Technical Discussion

(MIDRANGE-L) mailing
list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting,

please take

a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion
(MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting,

please take

a moment to review the archives at
http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion
(MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting,

please take

a moment to review the archives at
http://archive.midrange.com/midrange-l.

This e-mail transmission contains information that is
intended to be confidential and privileged. If you receive
this e-mail and you are not a named addressee you are hereby
notified that you are not authorized to read, print, retain,
copy or disseminate this communication without the consent of
the sender and that doing so is prohibited and may be
unlawful. Please reply to the message immediately by
informing the sender that the message was misdirected. After
replying, please delete and otherwise erase it and any
attachments from your computer system. Your assistance in
correcting this error is appreciated.

--
This is the Midrange Systems Technical Discussion
(MIDRANGE-L) mailing list To post a message email:
MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change
list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting,
please take a moment to review the archives at
http://archive.midrange.com/midrange-l.

This e-mail transmission contains information that is intended to be confidential and privileged. If you receive this e-mail and you are not a named addressee you are hereby notified that you are not authorized to read, print, retain, copy or disseminate this communication without the consent of the sender and that doing so is prohibited and may be unlawful. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please delete and otherwise erase it and any attachments from your computer system. Your assistance in correcting this error is appreciated.