× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Hi Steve -

See Document Number: 8233537 - Recommended Remote Printer Queue Values
for Remote Output Queues

http://www-912.ibm.com/s_dir/slkbase.nsf/1ac66549a21402188625680b0002037
e/b49aa3cf3ce97d0d862565c2007d4393?OpenDocument&Highlight=2,recommended,
rmtoutq,values

Regards,

Scott Ingvaldson
System i Administrator
GuideOne Mutual Insurance Company


-----Original Message-----
From: Steve Landess [mailto:sjl_abc@xxxxxxxxxxx]
Sent: Wednesday, June 13, 2007 2:27 PM
To: midrange-l@xxxxxxxxxxxx
Subject: Fw: TCP/IP printing

!#$^$^^...originally sent this to the wrong list...
- sjl

----- Original Message -----
From: Steve Landess
To: CPF0000@xxxxxxxxxxxx
Sent: Wednesday, June 13, 2007 2:25 PM
Subject: Fw: TCP/IP printing


All -

Someone today asked me a question today about Remote Outq setup on the
System i that I'm not sure how to answer.

Long ago I did some research on System i TCP/IP printer setup, in
particular setting up remote output queues on the System i, but in the
end I just called a friend who had done it before and he told me what to
do...

One requirement of creating remote output queues that I don't understand
fully (yet) is the "Remote printer queue" (RMTPRTQ) name that must be
specified. On the printers here at work, they are mostly HP 4xxx
LAN-attached laser printers, and in the System i Outq description (using
WRKOUTQD) the remote printer queue name is specified as 'PR1'.

When I browse to the web interface for any of these printers on the LAN,
I don't see the queue name PR1 defined under the LPD queue names on the
printer itself. Is this where I should be looking?

So my real question is this -
If I were setting up a remote outq description for an HP 4350 laser
printer from scratch, how would I know that I should use PR1 as the
remote printer queue name? Is this information typically documented in
the printer manual?

Regards,
Steve



-----------------------------------------


DISCLAIMER:
This message and accompanying documents are covered by the
Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, and
contains information intended for the specified individual(s) only.
This information is confidential. If you are not the intended
recipient or an agent responsible for delivering it to the intended
recipient, you are hereby notified that you have received this
document in error and that any review, dissemination, copying, or
the taking of any action based on the contents of this information
is strictly prohibited. If you have received this communication in
error, please notify us immediately by e-mail, and delete the
original message.


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.