We tore the printer apart and found a defective drive belt. We were
able to contact Intermec and they helped up track down the part. We
have ordered 3 of these belts and should have the printer back up
tomorrow.
Thanks!
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[
mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Carl Galgano
Sent: Tuesday, May 29, 2007 7:28 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Intermec label printer replacement
Don, are you labels "stand alone", or do they integrate with data on
your iSeries? I have used the TL Ashford software before with a variety
of printers on the iseries. I have had great success with Zebra's ( a
little pricy), Citizen and Citoh. You don't need a twinax interface,
ethernet will work just fine. If you are going to use the printer in a
factory that doesn't have cat5 wiring close by, a wireless ethernet
print server attached to a parallel port works great too.
What kind of volume are you looking at?
cjg
Carl J. Galgano
EDI Consulting Services, Inc.
770-422-2995
www.ediconsulting.com
600 Kennesaw Avenue
Suite 400
Marietta, GA 30060
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[
mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Don Cavaiani
Sent: Tuesday, May 29, 2007 8:09 AM
To: Midrange Systems Technical Discussion
Subject: Intermec label printer replacement
I have an Intermec 4400 printer with the twinax feature. We print bar
coded labels from an RPG program. This printer is at "end of life" as
far as a maintenance agreement goes. The printer is failing, and I will
be looking into cost effective solutions.
All ideas welcomed!
Don F. Cavaiani
IT Manager
Amerequip Corp.
920-894-7063
"Only one who devotes himself to a cause with his whole strength and
soul can be a true master. For this reason mastery demands all of a
person."
Albert Einstein
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
