Setting up i5 for External Access

Hi All,



This is probably a no-brainer for you AS400 gurus, but it's something I
have not done yet. We're in the process up setting up for our HA
installation, and one of the requirements is for our AS400 to access the
Internet (to send reports, download PTFs, etc.). I know I probably have
to add a route to the routing table, but beyond that I'm not sure what
else needs to be done.



Here's a bit of info on our setup:



AS400 IP Address - 192.168.0.20

Gateway - 192.168.0.2

Firewall - 192.168.0.141

DNS Server - 192.168.0.23



Based on this info, what do I need to add to our i5 to allow it to see
external IP addresses? Through the wizard on Navigator, it added a
route (*DFTROUTE), but it doesn't appear to have solved the problem.
When I check the routes, here's what is in our tables:



Route Subnet Next Route

Destination Mask Hop Available

127.0.0.0 255.0.0.0 *DIRECT *YES

192.168.0.0 255.255.255.0 *DIRECT *YES

192.168.0.0 255.255.255.0 *DIRECT *YES

192.168.0.6 *HOST 192.168.0.6 *YES

192.168.200.0 255.255.255.0 192.168.0.2 *YES

224.0.0.0 240.0.0.0 *DIRECT *YES

224.0.0.0 240.0.0.0 *DIRECT *YES

224.0.0.0 240.0.0.0 *DIRECT *YES

*DFTROUTE *NONE 192.168.0.2 *YES



Any ideas would be appreciated.



Thanks!



/b;



-=-=-=-=-=-=-=-=-=-=-=-=-=-
Brian Piotrowski
Assistant Mgr. - I.T.
Simcoe Parts Service, Inc.
Ph: 705-435-7814 x343
Fx: 705-435-6746
-=-=-=-=-=-=-=-=-=-=-=-=-=-