Re: How To Configure Console Address

[Jerry Adams <jerry@xxxxxxxxxxxxxxx>]

Some twinax terminals can be set by powering off the device, holding the 
space bar down, and powering on the device (let up on the space bar once 
you hear the clicking sound).  Follow the menu options.


Some others have a "Setup" key; usually in the lower left-hand corner of 
the display.  For those just press the Setup key after signing off of 
any session/job.


        * Jerry C. Adams
*IBM System i5/iSeries Programmer/Analyst
B&W Wholesale Distributors, Inc.* *
voice
        615.995.7024
fax
        615.995.1201
email
        jerry@xxxxxxxxxxxxxxx <mailto:jerry@xxxxxxxxxxxxxxx>



fu_james@xxxxxxxxxxxxxx wrote:
> I believe the address is set in the console itself. You need to change the
> address from 3 to 0 in your secondary console. Sorry I forget the
> function keys that will lead you to the configuration menu in the console.
> Please check your manual...
>
> Best Regards.
>
> James Fu
>
> TDL Group Corp. (Tim Hortons)
> Oakville, Ontario
> Direct: 905-339-5798
> fu_james@xxxxxxxxxxxxxx
> Web: http://www.timhortons.com
>
>
>                                                                            
>              TacK                                                          
>              <kinjo40@xxxxxxxx                                             
>              m>                                                         To 
>              Sent by:                  midrange-l@xxxxxxxxxxxx             
>              midrange-l-bounce                                          cc 
>              s@xxxxxxxxxxxx                                                
>                                                                    Subject 
>                                        How To Configure Console Address    
>              02/27/2007 10:34                                              
>              AM                                                            
>                                                                            
>                                                                            
>              Please respond to                                             
>              Midrange Systems                                              
>                  Technical                                                 
>                 Discussion                                                 
>              <midrange-l@midra                                             
>                  nge.com>                                                  
>                                                                            
>                                                                            
>
>
>
>
> I have two consoles connected by TWINAX cable.
> Promary console is port 0 and address 0 and secondary
> console is port 3 and address 3. address 1 and 2 is
> shared by printer.
>
> Now the display of the primary console has been broken
> down and I need to replace the secondary console as a
> primary. I tried to pulgin the cable which is
> connedted to the primary and turned on the console,
> but the console is recognized as port 0 and address 3.
>
> Does anybody know how to configure the address on the
> console? or do I have to IPL?
>
>
>
>
> ____________________________________________________________________________________
>
> Expecting? Get great news right away with email Auto-Check.
> Try the Yahoo! Mail Beta.
> http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>
>
> The information contained in this message is confidential and may be legally 
> privileged. The message is intended solely for the addressee(s).  If you are 
> not the intended recipient, you are hereby notified that any use, 
> dissemination, or reproduction is strictly prohibited and may be unlawful. If 
> you are not the intended recipient, please contact the sender by return e-mail 
> and destroy all copies of the original message.
>
> L'information contenue dans ce  message est de nature confidentielle et peut 
> etre de nature privilegiee. Ce  message est strictement reserve a l'usage de 
> son ou ses destinataires. Si vous  n'etes pas le destinataire prevu, prenez 
> avis, par la presente, que tout usage,  distribution, ou copie de ce message 
> est strictement interdit et peut etre  illicite. Si vous n'etes pas le 
> destinataire prevu, veuillez en aviser  l'expediteur par courriel et detruire 
> tous les exemplaires du message original.
>
>