Re: Weird sign on problems

[Léo Lefebvre <leo@xxxxxx>]

Then, check the "work station name entries" and "work station type 
entries" in the Sub-System description(s)


Leo




Nick_Radich@xxxxxxxxxxxxxx wrote:

> Yup,  I looked at that, and it was the correct Workstation ID for her, 
> RWHITE1.
>
> thanx
>
> Nick Radich
> Sr. Programmer/Analyst
> EPC Molding, Inc.
> Direct  (320) 679-6683
> Toll free  (800) 388-2155  ext. 6683
> Fax  (320) 679-4516
> nick_radich@xxxxxxxxxxxxxx
>
>
>
> "Jonathan Mason" <jonathan.mason@xxxxxxxxxxxxxxxx> 
> Sent by: midrange-l-bounces@xxxxxxxxxxxx
> 10/25/06 10:19 AM
> Please respond to
> Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
>
>
> To
> "'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
> cc
>
> Subject
> RE: Weird sign on problems
>
>
>
>
>
>
> Have you checked the workstation name assigned in the Client Access 
> session
> configuration?  Click on the "Communication" menu and then select
> "Configuration".  There is a field where the Workstation ID can be
> specified.  If you leave it blank it will try to connect to a virtual
> device.
>
> Jonathan
>
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
> Nick_Radich@xxxxxxxxxxxxxx
> Sent: 25 October 2006 16:09
> To: midrange-l@xxxxxxxxxxxx
> Subject: Weird sign on problems
>
> Hello everyone,
>
> I have a User that gets the following on her SignOn screen, at least once 
> a
> week.  I guess it has been happening for years, but I have only been here
> for 2 years and just found out about it.  I have never seen, nor heard,
> anything like this.
>
> She can eventually sign on after a few tries.
>
> We are at V4R5 of the OS, and V4.3 of Client Access Express.
>
> It appears that her workstation is trying to sign into the RFINTER
> Subsystem, and not QINTER?  We use RFINTER for our scanning guns.  The
> session ID should be RWHITE1, but it looks like CA is trying to use
> QPADEV0001?
>
> Here is a screen shot of what is on her screen.
>
>
> [?3l[?7h[9;12H[?3l[?7h[1;1H[2J[0m   [1m[0m [1m  Sign On    [0m [2;80H 
> System  .:
> MORA1    [3;80H Subsystem: RFINTER    [4;80H Display .: QPADEV0001 [8;80H 
>
> User 
> . . [4m[0m [4m          [0m [9;80H Password  [0m           [0m [13;1H 
> Welcome t
> o MAPICS/XA [24;39H[1m[0m [1m (C) COPYRIGHT IBM CORP. 1980, 1999.    [0m 
> [9;12H[
> 9;12H[9;12H[?3l[?7h[1;1H[2J   [1m[0m [1m  Sign On    [0m [2;80H System  .: 
>
> MORA1
>    [3;80H Subsystem: RFINTER    [4;80H Display .: QPADEV0001 [8;80H User 
> . . [
> 4m[0m [4m          [0m [9;80H Password  [0m           [0m [13;1H Welcome 
> to MAPI
> CS/XA [23;80H[1m[0m [1mCPF1296 - Sign-on information required. 
>                       [9;12H[9;12H[0m 
>
>
> Has anyone seen anything like this?  Or is this from the aliens that 
> landed
> in North Dakota?  :-)
>
> Any help would be greatly appreciatted.
>
>
> Thanx,
>
> Nick
>
>
>
> Nick Radich
> Sr. Programmer/Analyst
> EPC Molding, Inc.
> Direct  (320) 679-6683
> Toll free  (800) 388-2155  ext. 6683
> Fax  (320) 679-4516
> nick_radich@xxxxxxxxxxxxxx
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, 
> unsubscribe,
> or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
> moment to review the archives at http://archive.midrange.com/midrange-l.
>
>
>
>
>
>