Re: Remote Control Panel

On the following
http://www-03.ibm.com/servers/eserver/iseries/access/console/:

<snip>
# Remote Control Panel parallel port cable, available February 2003:
The new Remote Control Panel parallel port cable (feature code 0383, part 
number 53P5704) 
is only supported with the V5R2M0 iSeries Access for Windows. V5R2M0 
iSeries Access for Windows can be used to connect with both V5R1 and V5R2 
OS/400.
</snip>

If that is not the cable you have you can config virtual control panel.

It's on the same site:
<snip>
Virtual Control Panel and Remote Control Panel:
V5R1 and later Operations Console users may wish to consider 
Virtual Control Panel to get Remote Control Panel functions 
without the need for a direct parallel cable connection.
Information on configuring Virtual Control Panel is available:
How to Install the Virtual Control Panel - V5R2 (PDF format) 
http://www-03.ibm.com/servers/eserver/iseries/access/console/pdf/installing_vcp_520.pdf
</snip>

Good luck 
_____________________________
Bryan Dietz 
Aktion Associates 


midrange-l-bounces@xxxxxxxxxxxx wrote on 04/06/2006 03:23:32 PM:

-> I am configuring a new iSeries 520 with Ops Console and it works great.
-> Now I want to configure the remote control panel.  What port on a 520 
do
-> you use for that special cable for remote control panel?
-> 
-> Christopher Bipes