Re: ASP2 questions

[Wayne McAlpine <wayne.mcalpine@xxxxxxxxxxxxxxxxx>]

No data gets placed in ASP2 until you create libraries or folders in it 
and move files to them.

Corbett wrote:
> Hi all,
>
> I just added some 17G drives to a 520 with all 35G drives in it.  The drives
> added ok, and I set them up in ASP 2 in a separate raid set (on a separate
> controller), thinking that this would be better since they are of different
> sizes.  However, the disk usage on these drives still shows 0% used.  I
> thought that the drives being in ASP2 would not be an issue with spreading
> the data.
>
>  
>
> Is there a problem with the way I configured these drives?  Could I/should I
> have added them to ASP 1?  I doubt if I could have added them to the same
> raid set, since they are of different size and in the expansion on a
> different controller card.
>
>  
>
> Any advice on this?
>
>  
>
> Your help is appreciated.
>
>  
>
> William A.(Tony) Corbett
>
> IBM Certified - AS/400 Developer
>
> http://www.asresources.com
>
> corbett@xxxxxxxxxxxxxxx
>
> 404-784-4737
>
> fax: 678-935-5005
>
>  
>
>  
>
>