Re: CWBDB0058

[Evan Harris <spanner@xxxxxxxxxx>]

Hi Col

I don't suppose you changed your password this morning by any chance ?

Regards
Evan Harris

At 06:17 a.m. 20/01/2006, you wrote:
> Hi,
>
> I have taken a look through the site and I cannot find any complete
> solution that works for me.
>
> Here's the problem:
>
> When trying to browse to a File Name in a Data Transfer Window I get the
> following error message:
>
> "
> CWBDB0058
>
> Unable to start database server due to communications error. Return code:
> %1 "
>
> Cause
>
> The database access API attempted to initiate a connection with the AS/400
> database server. The connection attempt failed due to a communications
> error. Possible causes for this error are:
>
> ·       There is no connection configured to the AS/400.
> ·       The AS/400 server jobs are not started.
> ·       An internal Client Access/400 communications error has occurred.
>
> Recovery
>
> Do one of the following:
>
> ·       Configure a connection to the AS/400.
> ·       Verify the communications configuration is correct.
> ·       Use the STRPJ command on the AS/400 to start program QZDAINIT in
> library QIWS, under subsystem QSERVER.
> ·       If using a TCP/IP connection use the STRHOSTSVR command on the
> AS/400 to start *ALL or *DATABASE servers.
> ·       If using a TCP/IP connection, use the PC program CWBPING to verify
> that the AS/400 servers are running.
> "
>
> This was working fine this morning but for some reason it is not now.  I
> have been renaming libraries, but I am sure that cannot be the reason for
> a communications problem - I changed all the names back again just in case
> and it had no effect.
>
> Any help greatly appreciated
>
> Col