× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. December 2005

Re: how to remove disk drive 9402

Jerry,
 In the 236 the drives will be on the left side.
 You will need a 7MM socket wrench and preferably a power tool to spin it.

 First remove both front and rear covers.
Second remove the top cover by loosening (NOT removing) two screws from the front and back just under the cover then lift straight up. 
 Third remove the left side plastic by two screws on the top of the cover.
 Fourth remove the left side by removing about 14 screws.
 Drives are at the front of the machine. No tools required :o)
(Jumper requirements are on the inside of the last side panel you removed.) 

   - DrFranken


Jerry Draper wrote:

I need to remove the disk drive from a 9402 (AS236).

Anyone know how?  I can't even find the thing.

On front from left there is tape, blank (empty), control panel.

On back from left is a blank, a blank, parallel port, and 2609.

Jerry

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.