× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



I installed 5298 on 12/03, all is well. I would like to thank 
everyone for all the great information supplied.
Willie Moore
California Fine Wire, Co.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of kirkg@xxxxxxxxxxxxx
Sent: Wednesday, November 30, 2005 6:44 PM
To: Midrange Systems Technical Discussion
Subject: Re: Current CUME 5298


I have an open PMR on this and below is a response from IBM today 11/30. 
This was in response to a question regarding doing a V5R1 to V5R3 upgrade 
and the possible impact of this (my words) unstable CUME process.

"Kirk, 

 There will be some new instructions coming out  and the CUME will be 
respun (keeping same number however.  If, you are putting on the old 
revision of the CUME, it's recommended to load, and set the three pre-req 
PTF's for apply first (SI17595 MF36693 MF36564), then IPL to B side.  Then 
you can do the GO PTF Opt 8 for the CUME and groups, then IPL again. 

1.  load PTF SI17595 
2.  load PTF MF36693 
3.  load PTF MF36564 
4.  apply PTF SI17595 (*IMMED or delayed) 
5.  apply PTF MF36693 (*IMMED or delayed) 
6.  apply PTF MF36564 delayed 
7.  IPL to B side 
8.  GO PTF opt 8, loading and setting CUME and all groups 
9.  IPL 

The new instructions will have you do the above if you have the old respin 
of the CUME - while the new respin of the CUME will be more like the 
previous instructions, only work.  Let me know if you have any questions. 
The new CUME and instructions are planned to come out sometime this week. 
"

A follow-up with IBM on how I could tell if want version of C5298 I will 
have...
"Kirk, 

 I have not heard the specifics, but my understanding is that the new 
instructions will have a step for you to determine which spin level you 
have, but I don't know what that step is." 

Again I and others have had good luck (no problems) and some of us have 
had problems (me included) my suggestion is to wait a week or so and 
re-order if you can wait to install it. 




 
_____________________
Kirk Goins CCNA
Systems Engineer, Manage Inc.
IBM Certified i5 Solution Sales
IBM Certified iSeries Solutions Expert
IBM Certified Designing IBM e-business Solutions 
Office 503-353-1721 x106 Cell 503-577-9519
kirkg@xxxxxxxxxxxxx      www.manageinc.com

There are 10 types of people in the world:
Those that understand binary, and those that don't.



"Roger Vicker, CCP" <rv-lists@xxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
11/30/2005 06:01 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
cc

Subject
Re: Current cume 5298






On 11/30/2005 12:47 PM, Willie J. Moore wrote:

>We are going to apply cume 5298 this weekend. I would like to know if 
there are any problems that anyone has ran into durning or afterwards 
appling the cume.
>Thanks,
>William....
>
>
> 
>


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.