RE: TCP/IP Route Question

Do you have multiple adapters, physical and / or virtual?  The 224.0.0.0
is loop back for each adapter.  The 127.0.0.0 is the default local IP
for inter program communications, that is when multiple programs
communication via IP and you don't what the outside to connect or the
program to connect to the outside.  Looks to me like you have three
adapters but only one is configured with an IP address.


Christopher Bipes

IS Director

CrossCheck, Inc. 

707.586.0551, ext. 1102

707.585.5700  FAX

Chris.Bipes@xxxxxxxxxxxxxxx
www.Cross-Check.com



Notice of Confidentiality: This e-mail, and any attachments thereto, is
intended only for use by the addressee(s) named herein and may contain
legally privileged and/or confidential information.  If you are not the
intended recipient of this e-mail, you are hereby notified that any
dissemination, distribution or copying of this e-mail, and any
attachments thereto, is strictly prohibited.  If you have received this
e-mail in error, please immediately notify me by e-mail (by replying to
this message) or telephone (noted above) and permanently delete the
original and any copy of any e-mail and any printout thereof.  Thank you
for your cooperation with respect to this matter.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Brian Piotrowski
Sent: Thursday, November 24, 2005 10:53 AM
To: Midrange Systems Technical Discussion
Subject: TCP/IP Route Question

Hi All,

 

I was reviewing the TCP/IP route info on our AS/400 and I see there are
multiple entries for the same record:

 

Route            Subnet           Next               Route   

 Destination      Mask             Hop              Available 

 127.0.0.0        255.0.0.0        *DIRECT            *YES    

 172.16.0.0       255.255.0.0      192.168.0.2        *YES    

 192.168.0.0      255.255.255.0    *DIRECT            *YES    

 192.168.0.0      255.255.255.0    *DIRECT            *YES    

 192.168.200.0    255.255.255.0    192.168.0.2        *YES    

 224.0.0.0        240.0.0.0        *DIRECT            *YES    

 224.0.0.0        240.0.0.0        *DIRECT            *YES    

 224.0.0.0        240.0.0.0        *DIRECT            *YES    

 *DFTROUTE        *NONE            192.168.0.1        *YES    

 

Is there a reason why I would need multiple entries of the same record?
If not, when I try to delete the duplicates (using the rmvtcprte
command), will it delete a single entry, or will it delete all entries
for that record?

 

Thanks!

 

Brian.

 

-=-=-=-=-=-=-=-=-=-=-=-=-=-

Brian Piotrowski

Specialist - I.T.

Simcoe Parts Service, Inc.

PH: 705-435-7814

FX: 705-435-6746

-=-=-=-=-=-=-=-=-=-=-=-=-=-

 

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.