RE: Adding Routes to the AS/400

I believe this should work...

ADDTCPRTE RTEDEST('172.16.0.0')    
          SUBNETMASK('255.255.0.0')
          NEXTHOP('192.168.0.2')   


> -------- Original Message --------
> Subject: Adding Routes to the AS/400
> From: "Brian Piotrowski" <bpiotrowski@xxxxxxxxxxxxxxx>
> Date: Tue, November 22, 2005 7:57 am
> To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
> 
> Hi All,
> 
>  
> 
> In order for our VPN/Firewall to see the AS/400, it was suggested that I
> add a route so that it can see it.  I was asked to add 172.16.0.0 /16
> gateway 192.168.0.2 to the AS/400.
> 
>  
> 
> Do I need to run ADDTCPRTE and add this info?  If so, in this case what
> is the route destination, s/n mask and next hop supposed to be in the
> above case?  Our iSeries system currently has an IP address of
> 192.168.0.20.
> 
>  
> 
> Thanks!
> 
> 
> Brian.
> 
>  
> 
> -=-=-=-=-=-=-=-=-=-=-=-=-=-
> 
> Brian Piotrowski
> 
> Specialist - I.T.
> 
> Simcoe Parts Service, Inc.
> 
> PH: 705-435-7814
> 
> FX: 705-435-6746
> 
> -=-=-=-=-=-=-=-=-=-=-=-=-=-
> 
>  
> 
> -- 
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.