RE: Attaching a Zebra printer to an AS/400

You might try setting it up using the *IBMSNMPDRV first.

I've got new Intermec printers that handle this just fine and SNMP is
better than using LPD/LPR via a RMTOUTQ.


HTH, 


Charles Wilt
--
iSeries Systems Administrator / Developer
Mitsubishi Electric Automotive America
ph: 513-573-4343
fax: 513-398-1121
 
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
kirkg@xxxxxxxxxxxxx
Sent: Wednesday, October 19, 2005 4:59 PM
To: Midrange Systems Technical Discussion
Subject: Re: Attaching a Zebra printer to an AS/400

Try using a RemoteOutq and using the QWPDEFAULT WSCST file.
 
_____________________
Kirk Goins CCNA
Systems Engineer, Manage Inc.
IBM Certified i5 Solution Sales
IBM Certified iSeries Solutions Expert
IBM Certified Designing IBM e-business Solutions 
Office 503-353-1721 x106 Cell 503-577-9519
kirkg@xxxxxxxxxxxxx      www.manageinc.com

There are 10 types of people in the world:
Those that understand binary, and those that don't.



"Erhardt, Bill" <Bill.Erhardt@xxxxxxxxx> 
Sent by: midrange-l-bounces+kirkg=manageinc.com@xxxxxxxxxxxx
10/19/2005 01:23 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
<MIDRANGE-L@xxxxxxxxxxxx>
cc

Subject
Attaching a Zebra printer to an AS/400







Can anyone tell how to configure a Zebra 105Sl printer on an AS/400?
The printer is attached on a LAN.



-----------------------------------------
IMPORTANT NOTICE: This message is intended only for the use of the
individual or entity to which it is addressed. The message may contain
information that is privileged, confidential and exempt from disclosure
under applicable law. If you are not the intended recipient, you are
notified that any dissemination, distribution or copying of this
communication is prohibited. If you have received this communication in
error, please notify the sender immediately. Thank you.