Big HMC Update: V5R1.0

Hot off the IBM e-mail press:
----------------------------------

HMC V5R1.0 Availability

Announcing the availability of Hardware Management Console 
Version 5 Release 1.0 for Power 5.

This Version provides several new enhancements:

1)Installation/Backup/Restore over ethernet networks.
2)Configuration support for Host Channel Adapters.
3)Mobile CoD support
4)Enhanced Manage On/Off CoD support
5)Shared Ethernet failover support for Virtual IO Server 
6)IO Server Support Enhancements for VIOS and RPA 
partitions
7)Redundant FSP with Dynamic failover Support 
8)Update to the HMC Operating System

Due to the changes in the Operating System, there is no 
corrective service to upgrade to Version 5 Release 1.0. 
Before upgrading, users must perform the Save Upgrade Data 
task to preserve partition profiles, users and 
configuration data on the HMC. 

This package is referenced by PTF MH00407(APAR MB01197) 
with ISO images for Recovery DVDs,
along with files needed to setup a network 
install/upgrade, can be downloaded from 
the techsupport web site: 
http://techsupport.services.ibm.com/server/hmc/power5/download/v51.Recov
ery.html

Recovery DVDs can also be ordered from IBM referencing 
PTF MH00407 (APAR MB01197)

The following fixes have also been included in this 
version:

Null pointer exception querying service effect for PCI slot
Mutiple confirmation panels displayed Manage on/off CoD
Manage CoD memory accepts values greater than available 
memory
Wrong msg format for Auto-discover IB support
IH:No error thrown when CODE_COMMIT failed during MES
E35F0010 59E503F5 rc on HMC after installing 4.5.0
Update finalizeImage to fix bad DHCP timezone symbolic link
PHYP async event received when FSP has indicated PHYP is 
down
Two E355xxxx errors in SFP
CIM server log First Data Capture: log less than 80M 
thrown out
exception in log file when viewing profile properties
Add administrative service processor failover GUI
Network install/backup/restore: eth0 should not be an 
option
Auto (unattended) Network install/backup/restore not 
working
fix CAGE_POWER_ON contstant to correct value 1 => 9
Inconsistent Exception
Change Help Properties in CECProperties files
Fix VIOPartition property for LPARs
HELP: Check in PIVIODialogs.html corrections (this time 
for rea
Frame Properties modify fails
Change Help Properties and wording for InfiniBand
Create and update help files for PIInfiniBandDialogs
452535    fix Manage Dumps GUI dump filtering
PCI Card Holder diagrams incorrect 
Profile Properties-Tagged I/O tab: Automatically select 
the hig 
Add persistence in FTP target selection
Enhance monitor support to detect CCFW hangs. 
IH:CFM with DLPAR failed w/ LIC internal error 
lssyscfg -r sys shows ipaddr=null 
Dlpar fails for cli and does not launch the panel on GUI 
indication event causes class cast exception 
Redundant fail over command fails with syntax error in 
chgsyscf 
lssyscfg -r frame does not display IP addresses correctly 


CONFIDENTIALITY NOTICE:  This e-mail communication, including attachments, is 
covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is 
confidential, and may be legally privileged.  If you are not the intended 
recipient or believe you received this communication in error, please reply to 
the sender indicating that fact and delete the copy you received.  In addition, 
retention, dissemination, distribution, copying, or otherwise use of the 
information contained in this communication is strictly prohibited.  Thank you.