RE: CPF4182 on copy

["Ritsema, Doug B" <Doug.Ritsema@xxxxxxxxx>]

This is the message.  What I just discovered is that I am only having
problems if I try it from a command line within my application.  When I exit
my application it works normally.

Message ID . . . . . . :   MCH3601       Severity . . . . . . . :   40      
Date sent  . . . . . . :   05/03/05      Time sent  . . . . . . :   10:54:59
Message type . . . . . :   Escape                                           
>From . . . . . . . . . :   DBR           CCSID  . . . . . . . . :   65535   
                                                                            
>From program . . . . . . . . . :   QDMCOPEN                                 
  From library . . . . . . . . :     QSYS                                   
  Instruction  . . . . . . . . :     128F                                   
                                                                            
To program . . . . . . . . . . :   QDMCOPEN                                 
  To library . . . . . . . . . :     QSYS                                   
  Instruction  . . . . . . . . :     128F                                   

-----Original Message-----
From: Elvis Budimlic [mailto:ebudimlic@xxxxxxxxxxxxxxxxxxxxxxxxx]
Sent: Tuesday, May 03, 2005 11:09 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: CPF4182 on copy


I am sorry Doug, I meant on the MCH3601 message screen.  So after you hit F1
on MCH3601, then hit F9 on it.   
Again, sorry for not being clear.

Elvis

-----Original Message-----
 Subject: RE: CPF4182 on copy

                           Display Message Details

 

 Message ID . . . . . . :   CPF4182       Severity . . . . . . . :   50

 Date sent  . . . . . . :   05/03/05      Time sent  . . . . . . :
10:54:59   
 Message type . . . . . :   Information

 From . . . . . . . . . :   DBR           CCSID  . . . . . . . . :   65535

 

 From program . . . . . . . . . :   QUOCMD

   From library . . . . . . . . :     QSYS

   Instruction  . . . . . . . . :     0464

 

 To program . . . . . . . . . . :   QUOMAIN

   To library . . . . . . . . . :     QPDA

   Instruction  . . . . . . . . :     10FF

 

 Time sent  . . . . . . . . . . :   10:54:59.043976

 

 
Bottom 
 Press Enter to continue.

 

 F1=Help   F3=Exit   F12=Cancel

 


-----Original Message-----

Can you hit F9 on this screen and post the display?

-----Original Message-----
Subject: CPF4182 on copy

Moving from V5R1 to V5R3.  Restored the library from tape.
Getting a CPF4182 when I try to copy a program in PDM but I can open the
program and save it with a different name.

Message ID . . . . . . :   MCH3601                                          
Message . . . . :   Pointer not set for location referenced.                
Cause . . . . . :   A pointer was used, either directly or as a basing
pointer, that has not been set to an address.

File HAWSRC in library HAWPGM member or device LOADXX not opened.
Error opening file HAWSRC in library HAWPGM.                     

It looks like the MCH3601 is causing the CPF4182.  Any ideas what might be
causing this?

TIA

Doug Ritsema
Holland American Wafer Co.



-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.