Re: CODE open in iSeries Navigator

[rob@xxxxxxxxx]

I hear you buddy.  I like iSeries Navigator.  However that is an area 
where I've not submitted all the pmr's and dcr's that I should have.  I 
suggest you might want to submit a pmr on your EVF... error and maybe a 
DCR on your choice of Notepad over Code/400.  I did like the way that WDSC 
opened an xml file on the ifs.  That was rather cool.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Jeff Crosby" <jlcrosby@xxxxxxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
03/08/2005 10:05 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Subject
CODE open in iSeries Navigator






I posted the following in WDSC list with no response, so I'll try it here.
I'm not sure if it's a iSeries Nav issue or a WDSC issue.  I would at 
least
like confirmation that others have this problem . . .

In iSeries Navigator, when expanding the 'root' down to the individual 
file
level and right-clicking on a file name, one of the options is "Code 
Edit".
Trying a Code edit there never works, however.  I always get an error box
stating "EVF2102 RC=32751 Host server name 192.168.0.1 not defined".  (I
would like to know if others of you 1) have this option show up on a
right-click, and 2) whether it works).

When I look at settings within Code, 192.168.0.1 (the i5) is set up.  Does
anyone know what I am missing here?

I know I can look at (and edit) IFS files via WDSC, but when I'm already 
in
iSeries Navigator for other reasons, it would be a time saver.

Actually, what would really be swell was if plain old Notepad was one of 
the
options in iSeries Nav.

Thanks.

-- 
Jeff Crosby
Dilgard Frozen Foods, Inc.
P.O. Box 13369
Ft. Wayne, IN 46868-3369
260-422-7531

The opinions expressed are my own and not necessarily the opinion of my
company.  Unless I say so.



-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.