RE: Accessing AS400 Through Port Redirection

[Chris Bipes <chris.bipes@xxxxxxxxxxxxxxx>]

Need to add a default route on your as400 using the address of your
router/firewall.

ADDTCPRTE RTEDEST(*DFTROUTE)       
          SUBNETMASK(*NONE)        
          NEXTHOP(ROUTERIPADDRERSS)

Chris Bipes

-----Original Message-----

I have a model 150 running v4r5 at home which is connected to my home
network.  I also have a cable broadband connection to my network with a
static IP address and a Draytek Vigor 2104p router peforming NAT and Port
Redirection.

I want to be able to access the AS/400 over the internet, and have set up
Port Redirection to map a specific port to the AS/400 (for example Port 4000
being redirected to the AS/400's port 80).  However, when I try to connect
from outside of the network I get no response from the AS/400.  Looking at
the router, I can see that the Port Redirection has generated the correct
address and port, but the AS/400 doesn't pick it up.

Is there anything that needs to be configured on the AS/400 that I may have
missed?  I can see web pages from within the network, but not from the
outside.

Any suggestions would be most appreciated.