Re: IXS cards and non IBM memory

Thank you.  Sometimes I think my boss' underwear is IBM blue.  So if 
anyone understands the FUD factor, it'll be him.  But he's the one who 
brought it up and if he's thinking about taking the shot...

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





Larry Bolhuis <lbolhuis@xxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
01/13/2005 10:25 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
cc

Subject
Re: IXS cards and non IBM memory






I have seen it done.  One of my customers tracked down the memory type 
and speed etc and found the part. We put them in and it worked.  This 
was on an older IXS but logic says it will work on new ones too but I 
don't have the specs on the stuff. My guess is that it's very common and 
may very well be identical to what's used in many xSeries servers.

My main issue with doing so, however, is that if you put in the wrong 
stuff and break something, you're purchasing a new IXS card. And in the 
rare case where the memory fails it's NOT covered under your IBM 24x7 
maintenance like the real deal is.  Also there is a clause in your IBM 
maintenance agreement that says "If you have Non-IBM bits in your 
machine, and there is a problem with your machine, if IBM legitimately 
believes the Non-IBM bits are the problem you (the customer) must remove 
the non-IBM bits so as to determine their role in the problem." 
Depending on what these 'bits' are, this could be a very big problem.

As usual: "It's your call."

  - DrF

pnelson@xxxxxxxxxx wrote:

>If anybody had tried this, it would most likely be Larry Bolhuis and Jim 
>Oberholtzer.   :-))
>
>www.frankenseries.com
>
>
>Paul Nelson
>Arbor Solutions, Inc.
>708-670-6978  Cell
>pnelson@xxxxxxxxxx
>
>
>
>
>
>rob@xxxxxxxxx
>Sent by: midrange-l-bounces@xxxxxxxxxxxx
>01/13/2005 07:35 AM
>Please respond to Midrange Systems Technical Discussion
> 
>        To:     midrange-l@xxxxxxxxxxxx
>        cc: 
>        Subject:        IXS cards and non IBM memory
>
>
>Has anyone tried using non IBM memory in IXS cards?  $2,800 for a 1gb 
>expansion seems a tad salty.  We don't mind a little premium but they 
>broke the envelope.
>
>Rob Berendt
> 
>

-- 
Larry Bolhuis                   IBM eServer Certified Systems Expert:
Vice President                    iSeries Technical Solutions V5R2
Arbor Solutions, Inc.             iSeries LPAR Technical Solutions V5R2
1345 Monroe NW Suite 259          iSeries Linux Technical Solutions V5R2
Grand Rapids, MI 49505            iSeries Windows Integration Technical 
Solutions V5R2
                                IBM eServer Certified Systems Specialist
(616) 451-2500                    iSeries System Administrator for 
OS/400 V5R2
(616) 451-2571 - Fax              AS/400 RPG IV Developer
(616) 260-4746 - Cell             iSeries System Command Operations V5R2

  If you can read this, thank a teacher....and since it's in English, 
thank a soldier.



-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.