RE: TCP/IP and programming connectivity problem (routing table question)

["Fritz Hayes" <fhayes@xxxxxxxxxxx>]

Hey Darren,

Sounds like you need to check the default route in the AS/400.  The default
entry should point to the key gateway or router of your network, one which
knows all the IP addresses of your VPN and WAN connections.  If you can talk
to all the desired servers from your PC, match the AS/400 gateway entry with
the one on the PC.

Fritz Hayes

<snip> 

I am now trying to setup the same programs on another site, and the service
program to PC communication is acting the same (ie. no traffic to the PC).

My question is, are routing table entries on the AS/400 necessary to
communicate with particular PC network address ranges (kinda like acting
like an outbound firewall).

Am I making any sense at all ?

Thanks in advance,
Darren McBride

<snip>