Re: Advanced S/36 (436) printer error

[Philipp Rusch <philipp.rusch@xxxxxxxxxxxx>]

Neil,
to be honest: I would not even know how to do that
Customer didn't change anything at the remote site since years.
What we did at the central site (where the 436 is sitting), we tried to
setup up a 5494 with a setup similar to the other site just to see
if it works together with the old controller/line definition.
Since these tests, of which all failed after handshaking, the old
remote controller refuses to connect to that  line anymore.
I don't know whats going on here, since we did not change
a single byte manually at the 436.

Regards from Germany, Philipp



Neil Palmer schrieb:

> Philipp,
>
> With your 5394 on an Advanced/36 have you tried running the 5394 in 5294 
> emulation mode?
>
> ...Neil
>
>
>
>
> Philipp Rusch <philipp.rusch@xxxxxxxxxxxx> 
> Sent by: midrange-l-bounces@xxxxxxxxxxxx
> 2004/04/02 07:35
>
>
>
> To
> Midrange List <MIDRANGE-L@xxxxxxxxxxxx>
> cc
>
> Subject
> Advanced S/36 (436) printer error
>
>
>
>
>
>
> Hi all,
>
> problem with a remotely attached printer (at a 5394 controller),
> we try to release spoolfiles to that printer and get SRC0228 as
> an error message and nothing prints out anymore.
> The printer looks okay, it is online and varied on, it does "something"
> when you vary on, so we think, the connection is "there".
> BUT - nothing except SRC0228, and no RTFM around ....
>
> Any help much appreciated, Philipp
>
>
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>
>