I'm not familiar with that particular model. But many of the Intermecs we have include an HTTP server for admin purposes. If yours has one, can you connect to it? If so, make sure LPD is enabled. Charles > -----Original Message----- > From: Bonnie_Lokenvitz@xxxxxxxxxxxxxx > [mailto:Bonnie_Lokenvitz@xxxxxxxxxxxxxx] > Sent: Tuesday, March 09, 2004 7:18 AM > To: midrange-l@xxxxxxxxxxxx > Subject: Remote Printer - What do I ask Network guy to check > on his side? > > > > > Still at V4R5 and still operator-less. > > We have several Intermec 3400's setup as remote writers. > CRTOUTQ with connection type *IP and the IP address. Added another > yesterday. > > The As/400 print stays in send mode and this error appears in > QSPL job: > > TCP3436 > Message . . . . : No response from remote host system within open > time-out. > Cause . . . . . : An open request was sent to a remote host > system, but > that > host system did not respond to the request before the open time-out > expired. > This may be due to the fact that the TCP/IP services are > not currently > > available on the remote host system. > > > The network admin says he can ping it so there's no problem. > VFYTCPCNN > from AS/400 also works. Where else should we be looking? > > Thanks much, > Bonnie Lokenvitz > Engineered Polymers > > > _______________________________________________ > This is the Midrange Systems Technical Discussion > (MIDRANGE-L) mailing list > To post a message email: MIDRANGE-L@xxxxxxxxxxxx > To subscribe, unsubscribe, or change list options, > visit: http://lists.midrange.com/mailman/listinfo/midrange-l > or email: MIDRANGE-L-request@xxxxxxxxxxxx > Before posting, please take a moment to review the archives > at http://archive.midrange.com/midrange-l. >
As an Amazon Associate we earn from qualifying purchases.
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.