Re: Old stuff in wrkhdwrsc *cmn

[rob@xxxxxxxxx]

Oh, *CTLD, not WRKHDWRSC stuff.  That's different.  And I'd be willing to 
bet that you did do the RSTCFG if you have these additional ones.  It's 
buried under the covers on GO RESTORE - 21.
Just blasting these using WRKCTLD - option 4 to delete should be fine.  I 
have a tendency to do an option 8 for config status, then an option 8 for 
device description on each device under the now defunct controller, to 
blast the devices.  Beats leaving the orphans running around.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





oliver.wenzel@xxxxxxxxxxxxxxxxxxxxxxx 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
02/11/2004 05:10 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
cc

Fax to

Subject
Re: Old stuff in wrkhdwrsc *cmn







Hi Rob,


>Question:  When you did your restore did you take the proper option about
>restoring configs when moving to a different system?  Otherwise,
>congratulations!  At least your system is still running.  Normally you'd
>be toast at this time.  Even beyond restore from scratch.  Well
>documented.  In fact the Backup and Recovery Guide has several cautions
>regarding this.

Well, I believe we did a scratch install from CD and then restored all the
stuff
from the last 820 full backup. I don't believe we did a rstcfg then.

But, for example, the 810 has two twinax controllers and we now have two
additional
*ctld from the 820. So, we had to "migrate" all devices from CTL03 (old
820) to the
new CTL02 from the 810.

Thanks,

Oliver


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.