Re: HP4200N Question

["Cynthia Goodden" <ckovarik@xxxxxxxxxxxxx>]

Hello Paul and thanks for the quick response.

Turned out to be a problem with our PSF config.

Attaching link to IBM page for IPDS setup should anyone else encounter the
same.

http://www-912.ibm.com/s_dir/slkbase.NSF/acf2ee1e9d64b16e8625680b00020389/516c5f9756b1368a86256690004c3af3?OpenDocument

TIA
CMG
----- Original Message ----- 
From: "Paul Tykodi" <p.tykodi@xxxxxxxxxxxxxxx>
To: <midrange-l@xxxxxxxxxxxx>
Cc: <ckovarik@xxxxxxxxxxxxx>
Sent: Thursday, January 15, 2004 7:17 PM
Subject: Re: HP4200N Question


> Hi Cynthia,
>
> The port the HP printer will use to listen for IPDS data is configurable
at
> the HP printer itself. The typical factory default port for receiving IPDS
> data is 5001. You would probably want to verify the HP printer has been
> configured to listen for IPDS data on port 9100 and then try your
connection
> from the IBM host again.
>
> HTH
>
> Best Regards,
>
> /Paul
> --
> Paul Tykodi
> National Product Manager
> Print4sight Inc.
>
> p: 603-431-0606 x115
> f: 603-436-6432
> E-mail: p.tykodi@xxxxxxxxxxxxxxx
> www.print4sight.com
>
> >date: Wed, 14 Jan 2004 20:23:26 -0500
> >from: "Cynthia Goodden" <ckovarik@xxxxxxxxxxxxx>
> >subject: HP4200N Question
> >
> >Hoping someone can help me here.  I have an HP 4300N IPDS capable printer
> configured
> >and working on our iSeries 810 ... using port 9100.  Just purchased an HP
> 4200N IPDS
> >capable and cannot get it to work on iSeries.  While I do have calls in
to
> HP and IBM,
> >thought I would float it by the list to see what I am missing here.
> >I'm thinking it's port related?
> >
> >Thanks!
>